THROTTLED ! ,Low power to Raspberry-Pi-3B+ (3D Printing)
Posted: Sun Jun 20, 2021 1:03 pm
Throttled, Low power to Raspberry-Pi-3B+ using image EZPi (OctoPrint) from TH3D.
When I was first using EZPi (OctoPrint) with the Raspberry-Pi-3B there was no low power issues.
About a year ago when trying to install new OctoPrint updates a message came up saying,
“Can't Update While Throttled”.
The pi performed with no troubles, but was just not able to do any new updates.
I worked on it a lot by getting better 5v power-supplies, changing USB cables and nothing helped.
But there is hope, this video shows and explains why this is happening
and by increasing the voltage to 5.6v will fix the trouble:
https://www.youtube.com/watch?v=JadID7eRTtQ
So I am looking for the best way to correct this trouble.
When I was first using EZPi (OctoPrint) with the Raspberry-Pi-3B there was no low power issues.
About a year ago when trying to install new OctoPrint updates a message came up saying,
“Can't Update While Throttled”.
The pi performed with no troubles, but was just not able to do any new updates.
I worked on it a lot by getting better 5v power-supplies, changing USB cables and nothing helped.
But there is hope, this video shows and explains why this is happening
and by increasing the voltage to 5.6v will fix the trouble:
https://www.youtube.com/watch?v=JadID7eRTtQ
So I am looking for the best way to correct this trouble.