Wiring Diagram for Hotend Cable Plug Connections to Control-Box for the CR10 Printer
------------------------------------------------------------------------------------------
How to disassemble the Hotend-Plug to the Control-Box
1) Undo the two clamp screws.
2) Unscrew the black part of the plug from the metal part of the plug.
------------------------------------------------------------------------------------------
1 = Hotend Heater (not polarity sensitive)
2 = Hotend Heater (not polarity sensitive)
3 = Hotend Thermistor (not polarity sensitive)
4 = Hotend Thermistor (not polarity sensitive)
5 = Hotend Fan, Yellow +12 volts (polarity sensitive)
6 = Hotend Fan, Blue -12 volts (polarity sensitive)
7 = Part Cooling Fan, Red +12 volts (polarity sensitive)
8 = Part Cooling Fan, Black -12 volts (polarity sensitive)
Wiring of the Hotend Cable Plug (CR10 3D Printer)
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Wiring of the Hotend Cable Plug (CR10 3D Printer)
Last edited by bob195558 on Mon Oct 05, 2020 1:57 am, edited 3 times in total.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Wiring of the Hotend Cable Plug (CR10 3D Printer)
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Wiring of the Hotend Cable Plug (CR10 3D Printer)
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).