Upgrade to V6 All Metal Hotend with V6 Heavy Duty Mount (CR10 3D Printer)

Any 3D printing projects
Post Reply
User avatar
bob195558
Posts: 2377
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Upgrade to V6 All Metal Hotend with V6 Heavy Duty Mount (CR10 3D Printer)

Post by bob195558 »

V6 Heavy Duty Mount Bracket_d.jpg


TH3D V6 All Metal Hotend with V6 Heavy Duty Mount Upgrade to the CR10 3D Printer

List of items I used:
1) V6 Tough Ultimate Hotend Package:
https://www.th3dstudio.com/product/th3d ... d-package/
or this https://www.th3dstudio.com/product/tough-v6-hotend/
a) Tough All-Metal Hotend w/Nozzles
b) Silicone Sock
c) Titanium Heatbreak
d) 50 Watt Heater
e) Thermistor
f ) Tough Tube - High Temp, Tight Tolerance PTFE Tubing with
Tough PTFE PC4-M10 Fitting
Tough PTFE PC4-M6 Fitting
https://www.th3dstudio.com/product/esse ... rade-pack/
g) 40mm 12V Fan
h) Two: 5015 12V Fans

2) CR-10/CR-10S V6 Heavy Duty Mount – 5015 Fan and EZABL (ABS):
https://www.th3dstudio.com/product/cr-1 ... and-ezabl/

3) Left-Hand 5015 Fan Add on Bracket (ABS):
https://www.th3dstudio.com/product/left ... n-bracket/

4) Two: M3 x 4mm Button Head hex-socket screws.

5) Two: M3 x 20mm Button Head hex-socket screws (5015 Fans).

6) Two: M3 x 10mm Flat Head hex-socket screws.

7) Two: M3 x 22mm Flat Head hex-socket screws.

8) Six: M3 Nuts. https://www.amazon.com/Shapenty-100PCS- ... -1-catcorr

9) Two: M3 x 12mm Allen Round-Head self-tapping screws (40mm Fan).
V6 Heavy Duty Mount Bracket Screws_a.jpg
10) Three: JST-SH Servo Plug Wires (for making fan connections).
https://www.amazon.com/RCmall-Servo-Ext ... deo&sr=8-4
JST Servo Extension Cable_a.jpg
----------------------------------------------------------------------------------------------
Process:

11) Note: I used for this upgrade, the Stock CR10 Extruder for this upgrade.

12) I also used the Stock CR10 Thermistor and Heater, which are
attached to the Hotend-Cable coming from the Control Box.

13) Remove the Stock CR10 Hotend-Cable from the Control-Box to the CR10 Printer.
Cable V6 Heavy Duty Mount Bracket_cc.jpg
14) Make the Fan-Wire ends and Hotend-Cable Fan-Wire ends to use the JST-SH Servo Plugs.
(Cut/Strip/Solder/Heat-Shrink-Tubing, to attach the JST Plugs)
V6 Heavy Duty Mount Bracket_hhh.jpg
15) At the bench, I fit these parts together before assembling them to the CR10 Printer.
V6 Heavy Duty Mount Bracket_nnn.jpg
V6 Heavy Duty Mount Bracket_nn.jpg
V6 Heavy Duty Mount Bracket_n.jpg


16) After everything is attached and fitted together, I was then ready to assemble upgrade to my CR10 Printer.
V6 Heavy Duty Mount Bracket_JJJ.jpg
V6 Heavy Duty Mount Bracket_mm.jpg
V6 Heavy Duty Mount Bracket_mmm.jpg


.
V6 Heavy Duty Mount Bracket_gg.jpg
V6 Heavy Duty Mount Bracket_ddddd.jpg
V6 Heavy Duty Mount Bracket_LLL.jpg

..
V6 Heavy Duty Mount Bracket_aa.jpg
V6 Heavy Duty Mount Bracket_m.jpg
V6 Heavy Duty Mount Bracket_LLLL.jpg
Attachments
V6 Tough Ultimate Hotend Package_a.jpg
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).

Post Reply

Return to “3D Printing”