Starting and Ending G-codes for your Slicer (3D-Printer CR10)

Any 3D printing projects
Post Reply
User avatar
bob195558
Posts: 2309
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Starting and Ending G-codes for your Slicer (3D-Printer CR10)

Post by bob195558 » Sat Aug 27, 2022 10:51 am

Starting and Ending G-codes for your Slicer

This is what I use in my Slicer with the hardware-upgrades of my CR10 Printer.
TH3D EZABL

Starting G-codes:
M75 ; Start Timer and Engage Filament Monitor
G28 ; home all axes
G29 ; auto level
G4 S10; wait for heaters to recover
G1 X0 Y20 Z0.2 F3000 ; get ready to prime
G92 E0 ; reset extrusion distance
G1 F200 E25 ; extrude filament
G92 E0 ; reset extrusion distance again
M420 Z1 ; fade ABL off after 1mm

Ending G-codes:
91
G1 F1800 E-3
G1 F3000 Z10
G90
G00 X290 Y290 ; finish position x and y axis
M106 S0 ; turn off cooling fan
M104 S0 ; turn off extruder
M140 S0 ; turn off bed
M84 ; disable motors

Also for more info go to: viewtopic.php?f=129&t=11963
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).


Post Reply

Return to “3D Printing”