Designing with FreeCAD (3D Printing)

Any 3D printing projects
Post Reply
User avatar
bob195558
Posts: 2303
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Designing with FreeCAD (3D Printing)

Post by bob195558 » Thu Jan 13, 2022 7:37 pm

I am changing to FreeCAD for designing 3D-Printed parts.
It is open-source and has a large community of users who are very helpful when you need help much like Openrcforums is.
Fusion 360 is becoming more difficult to use as time moves along.
One of the things I like is that it is not cloud-based, so I use it offline and save only to my computer.
Because of the way the world is moving, it is a smart thing to save your stuff offline today.

If you want to check out FreeCAD you can down load it here:
https://www.freecadweb.org/downloads.php

You can also find the FreeCAD Forum here:
https://forum.freecadweb.org/search.php ... ive_topics

Here you will find my post asking for help in creating a part to be used to make an Air-Dryer for my air compressor.
https://forum.freecadweb.org/viewtopic.php?f=3&t=65262

Please forgive my rough quick hand sketch design that I made.
Last edited by bob195558 on Mon Jan 17, 2022 4:52 pm, edited 1 time in total.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).


User avatar
bob195558
Posts: 2303
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: Designing with FreeCAD

Post by bob195558 » Fri Jan 14, 2022 11:09 am

Here what I have designed with FreeCAD and 3D Printed.

FreeCAD AirDryerTube_b.jpg
FreeCAD AirDryerTube_b.jpg (44.37 KiB) Viewed 28 times

Simplify3D AirDryerTube_b.jpg
Simplify3D AirDryerTube_b.jpg (51.09 KiB) Viewed 28 times
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).

User avatar
bob195558
Posts: 2303
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: Designing with FreeCAD

Post by bob195558 » Sat Jan 15, 2022 2:34 am

Some pictures showing the assembly of this Van-Air (now Air-Dryer) filter
with the moisture absorbing Silica Gel Blue Beads.



Moisture Absorbing Silica Gel Blue Beads_aaa.jpg
Moisture Absorbing Silica Gel Blue Beads_aaa.jpg (149.4 KiB) Viewed 17 times
VanAirFilter_SilicaGelBlueBeads_cc.jpg
VanAirFilter_SilicaGelBlueBeads_cc.jpg (160.11 KiB) Viewed 17 times
VanAirFilter_SilicaGelBlueBeads_ff.jpg
VanAirFilter_SilicaGelBlueBeads_ff.jpg (158.52 KiB) Viewed 17 times

VanAirFilter_SilicaGelBlueBeads_bb.jpg
VanAirFilter_SilicaGelBlueBeads_bb.jpg (177.87 KiB) Viewed 17 times
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).


Post Reply

Return to “3D Printing”