New TH3D Tough Direct Heatsink Extruder / V6 (CR10 3D Printer)

Any 3D printing projects
Post Reply
User avatar
bob195558
Posts: 2154
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

New TH3D Tough Direct Heatsink Extruder / V6 (CR10 3D Printer)

Post by bob195558 » Fri Dec 27, 2019 2:43 am

New TH3D Tough Direct Heatsink Extruder / V6
Find some parts here: https://www.th3dstudio.com/product/th3d ... d-package/
printing PETG filament.
Atomic SkiPole Basket_k.jpg
Working a lot better then the stock CR10 Hotend did.



Down load short video below:
Atomic SkiPole Basket_Video_h.MOV
(14.16 MiB) Downloaded 7 times




Atomic SkiPole Basket_J.jpg
Atomic SkiPole Basket_JJ.jpg
Atomic SkiPole Basket_kkb.jpg
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.

3D Printing upgrades with (CR10 3D Printer): (http://openrcforums.com/forum/viewforum.php?f=85).


User avatar
bob195558
Posts: 2154
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: New TH3D Tough Direct Heatsink Extruder / V6 (CR10 3D Printer)

Post by bob195558 » Fri Dec 27, 2019 5:54 pm

Larger Smooth PEI EZFlex Flex Plate_a.jpg
Larger Smooth PEI EZFlex Flex Plate_b.jpg
Larger Smooth PEI EZFlex Flex Plate_d.jpg
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.

3D Printing upgrades with (CR10 3D Printer): (http://openrcforums.com/forum/viewforum.php?f=85).

User avatar
bob195558
Posts: 2154
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: New TH3D Tough Direct Heatsink Extruder / V6 (CR10 3D Printer)

Post by bob195558 » Tue Dec 31, 2019 12:11 am

rim_design-fb3_PETG_RedCat_5ee.jpg
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.

3D Printing upgrades with (CR10 3D Printer): (http://openrcforums.com/forum/viewforum.php?f=85).


Post Reply

Return to “3D Printing”