Problem with last new Hobbyking Turnigy 9X transmiters.

User avatar
MikeB
9x Developer
Posts: 15716
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Problem with last new Hobbyking Turnigy 9X transmiters.

Post by MikeB » Sat Nov 25, 2017 7:07 pm

When trying to flash, please add -B 100 on the AvrDude command line. This slows the programming speed down and may let the flash operation work.
Do NOT use the -F option.

Mike.
ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

ReSt
Posts: 1471
Joined: Tue Dec 27, 2011 11:34 pm
Country: -

Re: Problem with last new Hobbyking Turnigy 9X transmiters.

Post by ReSt » Sat Nov 25, 2017 10:17 pm

Some time ago, with the M128 processor, I had the hard reproduceable error 0102 when the throttle cut switch was in the up position.

Check that this is not your problem.

Reinhard

drotgabesz
Posts: 2
Joined: Sat Nov 25, 2017 7:08 am
Country: -

Re: Problem with last new Hobbyking Turnigy 9X transmiters.

Post by drotgabesz » Fri Dec 08, 2017 6:14 pm

Hi,

thanks for the support, the -B 100 solved the writing problem.

Post Reply

Return to “9Xtreme upgrade board”