9Xtreme FrSky Haptic Upgrade Mod
Posted: Sat Feb 13, 2016 3:50 am
9Xtreme FrSky Haptic Upgrade Mod
Wiring connections for the 9Xtreme Expansion Grid:
1) Pin 10: +3.3V
2) Pin 12: Haptic Out Signal
3) Pin 13: -GND
FrSky Haptic
Add wires to FrSky Haptic Upgrade
I bent the expansion grid pins at about 45 degrees so that the two case halves will fit together.
Bob B.
Wiring connections for the 9Xtreme Expansion Grid:
1) Pin 10: +3.3V
2) Pin 12: Haptic Out Signal
3) Pin 13: -GND
- 9Xtreme Expansion Grid Wiring Connections.
- FrSky Haptic Upgrade
- FrSky Haptic Wires added.