Before you install the DHT, let us know what you intend connect it. But better open another thread for that..
João
Reverse Current Protection Mod for 9xtreme
Re: Reverse Current Protection Mod for 9xtreme
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Reverse Current Protection Mod for 9xtreme
jhsa wrote:Before you install the DHT, let us know what you intend connect it. But better open another thread for that..
João
Thanks João.
I've created the topic, it's under viewtopic.php?f=126&t=9488.
In a couple of day's i'll remove this post, so to not pollute this thread.
-wm
Re: Reverse Current Protection Mod for 9xtreme
No, please don't remove it, as you have the link, it could be useful to some other people interested on your experience..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Reverse Current Protection Mod for 9xtreme
Hi. A bit of necroposting here. Im decided to try the mod too. May I use this? http://www.ebay.com/itm/10PCS-SS34-Vish ... SwlaxWNrVN
Also I am surprised that metal piece with V form is not needed. Why is it there? What was the purpose?
Also, does the 9XR PRO need this mod too?
Also I am surprised that metal piece with V form is not needed. Why is it there? What was the purpose?
Also, does the 9XR PRO need this mod too?
https://radindustries.wordpress.com/
Re: Reverse Current Protection Mod for 9xtreme
Yes you can..Rad wrote: ↑Sun Aug 13, 2017 6:11 pm Hi. A bit of necroposting here. Im decided to try the mod too. May I use this? http://www.ebay.com/itm/10PCS-SS34-Vish ... SwlaxWNrVN
When the 9x radio came out, it was a FM radio and used a much bigger antenna. This metal piece was used for it. It also connected the ground from both halves of the radio together.. But that is not needed because the 12 way connector that comes from the backplate and connects to the mainboard alreay has a ground wire.. So, the metal piece can be removed.Also I am surprised that metal piece with V form is not needed. Why is it there? What was the purpose?
No, I think the PRO is well protected against reversed polarityAlso, does the 9XR PRO need this mod too?
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Reverse Current Protection Mod for 9xtreme
As always, thanks for your answers. I will buy it and once I receive it I will install it
I have a lot of things to do in my radio, so far it has:
9xtreme,
Four 2-pos switches replaced by 3-pos ones.
One pot replaced with a 6 pos switch.
The resistor for the receiver mod.
Lifepo battery.
And the things to do list continues with:
Battery polarity mod,
Taranis gimbals,
Multiprotocol internal module.
Add two push switches (not sure if I can after installing the 4 3-pos switches)
Again thank you all for your help. I could not do anything without your tutorials.
I have a lot of things to do in my radio, so far it has:
9xtreme,
Four 2-pos switches replaced by 3-pos ones.
One pot replaced with a 6 pos switch.
The resistor for the receiver mod.
Lifepo battery.
And the things to do list continues with:
Battery polarity mod,
Taranis gimbals,
Multiprotocol internal module.
Add two push switches (not sure if I can after installing the 4 3-pos switches)
Again thank you all for your help. I could not do anything without your tutorials.
https://radindustries.wordpress.com/
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Reverse Current Protection Mod for 9xtreme
Hi Rad,
When you come to upgrading your 9xtreme Gimbals, you may want to consider the new M9-R Gimbals: (viewtopic.php?f=95&t=10431).
Bob B.
When you come to upgrading your 9xtreme Gimbals, you may want to consider the new M9-R Gimbals: (viewtopic.php?f=95&t=10431).
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).