Page 4 of 4

Re: Welcome!

Posted: Wed Nov 04, 2015 11:38 pm
by OctavioS
Just the splash screen. The warnings are displayed ok.

Enviado do meu Nexus 7 através de Tapatalk

Re: Welcome!

Posted: Wed Nov 04, 2015 11:52 pm
by MikeB
Have you turned the splash screen off on the radio setup (general menu)?

Mike.

Re: Welcome!

Posted: Wed Nov 04, 2015 11:56 pm
by OctavioS
Everything has been always on. Splash screen and splash name.

Enviado do meu Nexus 7 através de Tapatalk

Re: Welcome!

Posted: Thu Nov 05, 2015 12:53 am
by jhsa
Please check again ;)

João

Re: Welcome!

Posted: Thu Nov 05, 2015 9:41 am
by OctavioS
Yes its on. And i just checked i cant change the controls in the controls menu above the mode option. It doesnt even highlight it.

Re: Welcome!

Posted: Thu Nov 05, 2015 10:06 am
by jhsa
The stick reverse which uses the same graphics has moved to the hardware menu. The option you see in controls if for the sitck mode. please go to the hardware menu. This is the right place for it to be as it is ONLY hardware related, and you only need to change this option once, unless you change gimbals again ;)

João

Re: Welcome!

Posted: Thu Nov 05, 2015 10:17 am
by MikeB
If it is just the line above the mode option, then that is a change I did. I've moved that setting to the HARDWARE menu to prevent accidental modification, but the small images are still needed to show which stick goes with which control name.

I'll think on why your splash screen is missing. Maybe the radio "thinks" you have moved a stick (when you haven't), which cancels the splash screen.

Mike.

Re: Welcome!

Posted: Thu Nov 05, 2015 10:35 am
by OctavioS
Ok got it. When I switch on the radio, it shows very rapidly the 9xtreme word with the splash name below. But it's very fast and then the welcome sound is heard.

Enviado do meu Galaxy S6 edge através de Tapatalk.

Re: Welcome!

Posted: Thu Nov 05, 2015 11:25 am
by jhsa
Octávio, you have a fast radio now, only yours is faster than normal :mrgreen: :mrgreen:

João

Re: Welcome!

Posted: Thu Nov 05, 2015 3:10 pm
by OctavioS
Hehe, lucky me.

Enviado do meu Galaxy S6 edge através de Tapatalk.

Re: Welcome!

Posted: Thu Nov 05, 2015 10:30 pm
by Kaneda
Hello from the Netherlands guys,

Got my board really fast. Had some l'll troubles, but got it fixed.
There is a difference in screws tho! Had to use the silver ones.

I'm new to model flying.
Had the TGY 9X for a long time, but didn't use it.
Now I ordered a quad and have the 9Xtreme installed.
Can't wait for my 250 racer to come in.

Ow, and this is me:
https://youtu.be/bp2AIghSdx8

Re: Welcome!

Posted: Sun Nov 08, 2015 8:43 pm
by stewwy
master_yes.wav
(12.66 KiB) Downloaded 693 times


Some sound clips I have hanging around that might be useful :D

Edit: caveat, ok for private use only, not for commercial use.

Re: Welcome!

Posted: Thu Nov 12, 2015 1:00 pm
by OctavioS
MikeB wrote:If it is just the line above the mode option, then that is a change I did. I've moved that setting to the HARDWARE menu to prevent accidental modification, but the small images are still needed to show which stick goes with which control name.

I'll think on why your splash screen is missing. Maybe the radio "thinks" you have moved a stick (when you haven't), which cancels the splash screen.

Mike.
You probably don't remember but sometime before when this radio had er9x-frsky m64, it had a problem with the inactivity alarm not activating, and you did a change in the software and it became fine. Now this problem with the splash screen, so im thinking that this radio has some jittering issue that prevents the splashscreen to show up (and before the inactivity alarm to trigger).
What do you think?

Re: Welcome!

Posted: Tue Nov 17, 2015 3:55 pm
by Quadcells
MikeB wrote:It will just work with the 'X' series receivers. A new XJT will most likely have the "EU firmware" so won't support 'D' series receivers.

Mike.
Hi All,
New here and installed my Smarties board in my LlySky TH9x about two weeks ago and works great so far.
You mentioned that with the XJT will not work with "D" series receivers. Are you just talking about Telemetry?
I ask because I just installed the XJT transmitter module and it works great with my X series and D series receivers, but I haven't connected the telemetry yet.
thanks.
/quadcells

Re: Welcome!

Posted: Tue Nov 17, 2015 4:05 pm
by MikeB
An XJT bought in the EU probably won't work with 'D' receivers, but if bought outside the EU will not have the EU firmware and so is likely to work.

Mike.

Re: Welcome!

Posted: Tue Nov 17, 2015 4:14 pm
by Quadcells
Thanks Mike.

Deadband Problems

Posted: Tue Dec 15, 2015 2:44 pm
by 9XTremist
Has anybody had a problem with their deadband settings namely, when trying to set the RH or aileron width it skips the aileron and goes straight to the 6 pos switch, same thing in reverse. I've tried switching between v1.8 and v1.7 bootloader and back. I've tried earlier firmware versions but. This is the only glitch I've run across. Never had the speaker noise, never had the shutdown problem. The only gripe I really have is, this damn thing doesn't do harmonies very well at all.

Let the Good Times Roll.

Re: Welcome!

Posted: Tue Dec 15, 2015 3:31 pm
by MikeB
I have the fix for that problem. I just need to finish sorting something else, then I'll post a new test version with the fix in it.

Mike.

Re: I have the fix ...

Posted: Tue Dec 15, 2015 4:23 pm
by 9XTremist
I wasn't trying to hurry you along at all. I was thinking (that's what that wood burning smell is) I hadn't seen anybody over there mention it and that made me wonder if it was just me or something I brought on? So ...

Hey Mike,
I understand your one of the "Queso Grandes" around here.
Ever since I first tried to register here the anti-spam software or whatever it is flags me has having a blacklisted IP and or email and says I'm on such and such list but the IP is not my IP and when I go look at the list, the IP it thinks I have nor my email is on any of the list. So, I have to use a VPN (which I have anyway) and some of the servers of the VPN provider have been used by spammers (naturally) so I have to pay attention to which server I choose or it goes off on me. I did send whomever (it said to) a note twice, but to no avail. I've been called a lot of things, rightly so in some cases but never a low down spammer.

need some cheese for my whine

Re: Welcome!

Posted: Tue Dec 15, 2015 4:51 pm
by MikeB
I had that happen to me. I can't remember what the fix was. I contacted Rob Thomson who runs the forum.

Mike.