I'm having trouble binding a receiver to an OrangeRX DSM telemetry transmitter module for 9XR Pro.
This is the transmitter module:
https://hobbyking.com/en_us/orangerx-2- ... tible.html
Inserted module into 9XR Pro transmitter with ersky9x-r212 firmware.
In model setup page 01 (setup), set proto to DSM2 and set DSM Type to 9XR-DSM.
In model setup page 10 (telemetry), set UsrProto to DSMx.
In model setup page 11 (telemetry2), FrSky Com Port is set to 1 and Invert Com 1 is on.
Power up the receiver with bind plug in and orange LED is flashing.
Power up the transmitter with the bind button pressed.
LED on receiver flashes 7 times then goes out.
Transmitter module beeps 3 times twice and LED lights solid red.
Receiver is not bound as servos do not move with transmitter sticks.
Does same thing with telemetry receivers like the R820X and non telemetry receivers like the R410X.
I've searched the web and there doesn't seem to be much out there other than a few who had similar experiences.
Here's a well made video that someone else made that shows the problem I have exactly,
https://www.youtube.com/watch?v=1_2f-ML6gEk
Can anyone offer any advice?
Thank you!
Binding Issue
- MikeB
- 9x Developer
- Posts: 18051
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Binding Issue
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Binding Issue
I have replied to your reply in the other post in an effort to keep things more organized. My apologies for the cross posting.