project development?

Custom firmware development for the FlySky FS-T6 radio
Post Reply
georgegohl888
Posts: 1
Joined: Thu Jul 12, 2018 11:14 am
Country: -

project development?

Post by georgegohl888 » Thu Jul 12, 2018 11:17 am

hey i was wondering if this project is still being developed or not. its been at least 2 years since the last activity... i just bought a fs-t6 transmitter


User avatar
bob195558
Posts: 2191
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: project development?

Post by bob195558 » Thu Jul 12, 2018 11:56 am

Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.

Welcome to 3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).

prikrylm
Posts: 5
Joined: Wed Feb 05, 2020 9:19 pm
Country: -

Re: project development?

Post by prikrylm » Wed Feb 05, 2020 9:54 pm

Hello everybody.
Because FS-T6 is still in market and I bought used one, so I decided to improve the AR-T6 firmware. As I progress in study of the project, I was modified some icons, "sw warning" screen (after powering up the radio), and alpha version of the menu for helicopters (works on MODE1 only).
I hope some more improvements will be soon available.

(As the English is not my native language, be patient and tolerant. I'm still improving in English (and transmitter firmware programing) :) - language and program corrections are welcome.)
Attachments
ar-t6_src.zip
source codes (I'm not able to push results to art103/ar-t6 repository yet)
(3.51 MiB) Downloaded 66 times
ar-t6.zip
Latest firmware (alfa version)
(32.9 KiB) Downloaded 46 times

prikrylm
Posts: 5
Joined: Wed Feb 05, 2020 9:19 pm
Country: -

Re: project development?

Post by prikrylm » Wed Feb 12, 2020 7:55 pm

Hello,
now it looks like usable version.
new working features:
- switch MODE 1-4
- heli mix
- off channels in mixer are really off (now "---")
- some cosmetics i menu

But be careful, use on sim and inexpensive models only.
Source codes are "forked" to https://github.com/prikrylm/ar-t6.git (use MPRI branch).
Attachments
ar-t6.zip
(32.88 KiB) Downloaded 40 times

prikrylm
Posts: 5
Joined: Wed Feb 05, 2020 9:19 pm
Country: -

Re: project development?

Post by prikrylm » Fri Feb 14, 2020 7:10 pm

... basic backlight working
- "Light off after" =0 backlight always on, otherways the backlight goes out after adjusted amount of seconds.
- Light switch works

last pre-built binary is on https://github.com/prikrylm/ar-t6/raw/M ... /ar-t6.bin


prikrylm
Posts: 5
Joined: Wed Feb 05, 2020 9:19 pm
Country: -

Re: project development?

Post by prikrylm » Sat Feb 22, 2020 7:31 am

- some minor bug in heli setup was fixed (collecitve value behavior)
- accelerating of int setting - after 5 steps (incremented/cecremented by 1) next steps are icremented/decremented by 4, oposit direction reset the increment
- "preset model" now can be canceled

- "stupid" split of huge gui.c file in source code

https://github.com/prikrylm/ar-t6/raw/M ... /ar-t6.bin

prikrylm
Posts: 5
Joined: Wed Feb 05, 2020 9:19 pm
Country: -

Re: project development?

Post by prikrylm » Tue Mar 03, 2020 6:17 pm

(I continue the monologue) :-(
Some cosmetics on popup menus and messages.
Timer sounds is working now.
Timer is controlled by the OK and CANCEL buttons only (start/stop and reset)
TImer can be started/stoped by the Thr (Thr>) - reset by the CANCEL button works
Beta version of timer regulated by the Thr stick position.

The mater branch in GIT is now the right one.
So the latest firmware should be downloaded here: https://github.com/prikrylm/ar-t6/blob/ ... /ar-t6.bin


Post Reply

Return to “AR-T6”