project development?

Custom firmware development for the FlySky FS-T6 radio
Post Reply
georgegohl888
Posts: 1
Joined: Thu Jul 12, 2018 11:14 am
Country: -

project development?

Post by georgegohl888 » Thu Jul 12, 2018 11:17 am

hey i was wondering if this project is still being developed or not. its been at least 2 years since the last activity... i just bought a fs-t6 transmitter


User avatar
bob195558
Posts: 2167
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: project development?

Post by bob195558 » Thu Jul 12, 2018 11:56 am

Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.

Welcome to 3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).

prikrylm
Posts: 4
Joined: Wed Feb 05, 2020 9:19 pm
Country: -

Re: project development?

Post by prikrylm » Wed Feb 05, 2020 9:54 pm

Hello everybody.
Because FS-T6 is still in market and I bought used one, so I decided to improve the AR-T6 firmware. As I progress in study of the project, I was modified some icons, "sw warning" screen (after powering up the radio), and alpha version of the menu for helicopters (works on MODE1 only).
I hope some more improvements will be soon available.

(As the English is not my native language, be patient and tolerant. I'm still improving in English (and transmitter firmware programing) :) - language and program corrections are welcome.)
Attachments
ar-t6_src.zip
source codes (I'm not able to push results to art103/ar-t6 repository yet)
(3.51 MiB) Downloaded 27 times
ar-t6.zip
Latest firmware (alfa version)
(32.9 KiB) Downloaded 9 times

prikrylm
Posts: 4
Joined: Wed Feb 05, 2020 9:19 pm
Country: -

Re: project development?

Post by prikrylm » Wed Feb 12, 2020 7:55 pm

Hello,
now it looks like usable version.
new working features:
- switch MODE 1-4
- heli mix
- off channels in mixer are really off (now "---")
- some cosmetics i menu

But be careful, use on sim and inexpensive models only.
Source codes are "forked" to https://github.com/prikrylm/ar-t6.git (use MPRI branch).
Attachments
ar-t6.zip
(32.88 KiB) Downloaded 6 times

prikrylm
Posts: 4
Joined: Wed Feb 05, 2020 9:19 pm
Country: -

Re: project development?

Post by prikrylm » Fri Feb 14, 2020 7:10 pm

... basic backlight working
- "Light off after" =0 backlight always on, otherways the backlight goes out after adjusted amount of seconds.
- Light switch works

last pre-built binary is on https://github.com/prikrylm/ar-t6/raw/M ... /ar-t6.bin


prikrylm
Posts: 4
Joined: Wed Feb 05, 2020 9:19 pm
Country: -

Re: project development?

Post by prikrylm » Sat Feb 22, 2020 7:31 am

- some minor bug in heli setup was fixed (collecitve value behavior)
- accelerating of int setting - after 5 steps (incremented/cecremented by 1) next steps are icremented/decremented by 4, oposit direction reset the increment
- "preset model" now can be canceled

- "stupid" split of huge gui.c file in source code

https://github.com/prikrylm/ar-t6/raw/M ... /ar-t6.bin


Post Reply

Return to “AR-T6”