9xr-pro telemetry

ersky9xr is the port of the er9x firmware to the 9XRPRO radio.
Post Reply
wesk18
Posts: 5
Joined: Wed Feb 22, 2017 4:50 pm
Country: -

9xr-pro telemetry

Post by wesk18 » Wed Mar 01, 2017 5:47 am

Hello,

I have a 9xr-pro with ersky9xr220 and with the 4in1 tx module from banggood, how do i enable telemetry? I'm connected to a micro scisky with cleanflight, not sure if the scisky supports it.

thanks in advance


User avatar
MikeB
9x Developer
Posts: 17333
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: 9xr-pro telemetry

Post by MikeB » Wed Mar 01, 2017 9:11 am

What receiver are you using?
Have you got the 4-in-1 set up for a serial connection?

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

wesk18
Posts: 5
Joined: Wed Feb 22, 2017 4:50 pm
Country: -

Re: 9xr-pro telemetry

Post by wesk18 » Wed Mar 01, 2017 9:23 pm

Im using dsm2 it's integrated to the micro scisky, yup 4in1 in serial mode.
http://www.banggood.com/Micro-Scisky-32 ... mds=search

User avatar
MikeB
9x Developer
Posts: 17333
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: 9xr-pro telemetry

Post by MikeB » Wed Mar 01, 2017 11:27 pm

It should work if you are receiving telemetry, however, you need to get some setting correct.
Do you know if the 4-in-1 was built with the "INVERT_TELEMETRY" option?
On the Telemetry menu, set the "Usr Proto" to "DSMx", and make sure the "FrSky Com Port" is set to 1.
If the 4-in-1 has "INVERT_TELEMTRY" then this should work, otherwise, tick "Invert Com1".

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

wesk18
Posts: 5
Joined: Wed Feb 22, 2017 4:50 pm
Country: -

Re: 9xr-pro telemetry

Post by wesk18 » Wed Jun 14, 2017 12:36 am

Hello,

Telemetry is working after all, found out the board i was using doesn't support telemetry.

thanks


Post Reply

Return to “ersky9xr”