Eepe files
Eepe files
I'm trying to transfer models from my th9x with er9x to my new 9xr pro. I dragged and dropped them from one program to the other. Now when I try to load the model it says check mix. And it reboots my 9xr pro. I deleted all mixes and it still crashes. I don't really want to manually transfer all settings one at a time. Any help would be appreciated. Thanks!
Re: Eepe files
Hi, welcome to the forum..
Something that might help to find the problem.
Which version of the firmware on the pro, and which version of the firmware on the 9x?
João
Something that might help to find the problem.
Which version of the firmware on the pro, and which version of the firmware on the 9x?
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Eepe files
9x is er9x-r767
Vers: v1.5698-mike
9xrpro
Vers v. 110-mike
Svn: ersky9x-r217
Does that help?
Vers: v1.5698-mike
9xrpro
Vers v. 110-mike
Svn: ersky9x-r217
Does that help?
Re: Eepe files
Also it keeps crashing when setting the protocol. Here is a quick video of the problem. https://youtu.be/jT-QhesQFQc
Re: Eepe files
This is a very old version of the er9x firmware..4ndrew wrote:9x is er9x-r767
Vers: v1.5698-mike
9xrpro
Vers v. 110-mike
Svn: ersky9x-r217
Does that help?
Try updating it..
That problem on the 9xr-pro is already known and fixed, I just don't know if it was released though..
Just don't select the assan protocol. Is not doing anything anyway..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Eepe files
Thanks. So try updating my th9x? I'm trying to use a module that plugs into the headphone plug on the top of the 9xr pro. It's a wl-t6 module. On my th9x I set the protocol to ppmsim.
Re: Eepe files
hi there as mike said update your firmware to lastest, my expierence with the wl toys wl-t6 is that it is a dog to set up, i ended up throwing it away and get the cheap flysky modual which is under $20 its heaps easier to setup, also tx should be set to ppm for wl-6, hope this may help you,