turnigy 9xr pro with Jeti possible?

[killwi]

Hello,


I have a new Turnigy 9XR pro and thought it is possible, as in the 9x one jeti tu module installed, and display the telemetry data from my Mikrokopter.
but in eepskye or the companion 9XR per select them disappear option for jeti.

someone operates the 9xrpro with jeti

Thanks

Thomas

[MikeB]

At this point, I haven't implemented the JETI finctions into ersky9x. I just had a quick look at the code and it doesn't look too difficult to add the code to the firmware. What I'm then not sure about, as I don't have any JETI gear, is how the serial data would get wired to the JETI module.

Mike.

[killwi]

Hi Mike,


here is a link from a German forum http://www.fc00.de/turnigy_9x.htm

Unfortunately I can not find a matching contribution in English.

[MikeB]

OK, this looks possible. The data connection would need to be made to the SPort connection. This is pin 5 (bottom pin) of the module connector.
I'm continuing to look at the required code changes.

Mike.

[killwi]

I Need

[killwi]

Hi Mike

Thank you very much

quote
So for the people who have such a thing already at home and might have already performed the Jeti-conversion for telemetry:
http://utfreaks.de/er9x/er9x-trunk-r41-jeti.bin

[MikeB]

May be slightly more of a problem, but still possible. It looks to me that the serial data is non-inverted, logic level. The logic level is no problem, nor is the receive non-inverted data. The transmit data being non-inverted will need a software driver as the hardware only sends inverted data.

Mike.

[killwi]

hi Mike, I kept going. The Jeti module is installed, I can now operate 12 channels with my Mikrokopter .

Unfortunately, I'm stuck with the telemetry.

[MikeB]

I'm still working on this, I have some changes already in place, just need enough time to do everything!

Mike.

[killwi]

hi mike,

I am glad that you help me.

excuse my impatience

Thomas

[MikeB]

I've started a new thread to help me get extra telemetry protocols operating:
viewtopic.php?f=123&t=6167.

This will help me keep track of all the requirements, and report progress.

Mike.