Ersky9xr Test Versions

ersky9xr is the port of the er9x firmware to the 9XRPRO radio.
Post Reply
User avatar
MikeB
9x Developer
Posts: 17993
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Ersky9xr Test Versions

Post by MikeB »

This is NOT intended as a thread for discussions, just as somewhere I can put test versions of ersky9xr for people to try out.
The idea is I'll put a specific test version on here, with a reason why it is here. Later, when I have something else to test I'll remove that one and replace it with another.
This should stop lots of test versions all over the forum, and help avoid the forum taking up more space on the server than it needs to.

Mike.

PLEASE CHECK THIS POST: viewtopic.php?f=7&t=4676#p65894, for later updates.

The following have now been superceeded:
ersky9xr_rom_r212.zip
Test version of ersky9xr rev 212 08-Sep-2014 11:40
Intended next release.
Add SBUS input as trainer on COM2 support.
Start of support for 'other' telemetry protocols.
Minor bug fixes.
(120.56 KiB) Downloaded 364 times
ersky9xr_rom.zip
Test version of ersky9xr rev 211 18-Aug-2014 14:50
Fix timer reset switches bug
Make backward compatible to eepskye r402
PXX and SPort enabled
Fix to voice 'chopping' bug

Suppress initial voice messages on power on or model change.
Cosmetic: Scaler source names in GVARs
fix to openXsensor voltage ID.
fix to voice numeric when thousands present but no hundreds.
voice and display of fuel use percent(%) as the unit.
Cosmetic: display of time constant in a custom switch.
Sticky throttle cut applies to trainer throttle input.
Allow BT baudrate of 57600.
(116.51 KiB) Downloaded 281 times
ersky9xr_rom.zip
Test version of ersky9xr rev 211 08-Aug-2014 23:40
Make backward compatible to eepskye r402
PXX and SPort enabled
Fix to voice 'chopping' bug

Suppress initial voice messages on power on or model change.
Cosmetic: Scaler source names in GVARs
fix to openXsensor voltage ID.
fix to voice numeric when thousands present but no hundreds.
voice and display of fuel use percent(%) as the unit.
Cosmetic: display of time constant in a custom switch.
Sticky throttle cut applies to trainer throttle input.
Allow BT baudrate of 57600.
(116.31 KiB) Downloaded 269 times
ersky9xr_rom.zip
Test version of ersky9xr rev 211 05-Aug-2014 16:30
PXX and SPort enabled
Fix to voice 'chopping' bug

Suppress initial voice messages on power on or model change.
Cosmetic: Scaler source names in GVARs
fix to openXsensor voltage ID.
fix to voice numeric when thousands present but no hundreds.
voice and display of fuel use percent(%) as the unit.
Cosmetic: display of time constant in a custom switch.
Sticky throttle cut applies to trainer throttle input.
Allow BT baudrate of 57600.
(116.31 KiB) Downloaded 265 times
ersky9xr_rom211.zip
Test version of ersky9xr rev 211 16-Jul-2014 19:50
This is r204 with some minor bug fixes.
It is also ready to re-compile with PXX and SPort with a small change in a header.
List of changes:
Suppress initial voice messages on power on or model change.
Cosmetic: Scaler source names in GVARs
fix to openXsensor voltage ID.
fix to voice numeric when thousands present but no hundreds.
voice and display of fuel use percent(%) as the unit.
Cosmetic: display of time constant in a custom switch.
Sticky throttle cut applies to trainer throttle input.
Allow BT baudrate of 57600.
(108.2 KiB) Downloaded 310 times
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

Post Reply

Return to “ersky9xr”