Page 1 of 1
turnigy 9xrpro+xjt+x4rsb no rssi
Posted: Fri Aug 24, 2018 9:52 pm
by Ramzi
Hi i change software in my radio for ersky9xr 221. And i have problem with rssi . on my old soft i use futaba cable and telemetry com 2. Now it doesnt work. Plz help because without rssi i dont know when lost a signal
Re: turnigy 9xrpro+xjt+x4rsb no rssi
Posted: Sat Aug 25, 2018 10:21 am
by MikeB
If you have a XJT, then use COM1, and set the module protocol to XJT (D16).
Mike
Re: turnigy 9xrpro+xjt+x4rsb no rssi
Posted: Sat Aug 25, 2018 2:23 pm
by jhsa
With the XJT module there is no need for the telemetry cable with the futaba connector.
João