turnigy 9xrpro+xjt+x4rsb no rssi

ersky9xr is the port of the er9x firmware to the 9XRPRO radio.
Post Reply
Posts: 2
Joined: Fri Aug 24, 2018 9:47 pm
Country: -

turnigy 9xrpro+xjt+x4rsb no rssi

Post by Ramzi » Fri Aug 24, 2018 9:52 pm

Hi i change software in my radio for ersky9xr 221. And i have problem with rssi . on my old soft i use futaba cable and telemetry com 2. Now it doesnt work. Plz help because without rssi i dont know when lost a signal

User avatar
9x Developer
Posts: 16408
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: turnigy 9xrpro+xjt+x4rsb no rssi

Post by MikeB » Sat Aug 25, 2018 10:21 am

If you have a XJT, then use COM1, and set the module protocol to XJT (D16).

erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
Posts: 18742
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: turnigy 9xrpro+xjt+x4rsb no rssi

Post by jhsa » Sat Aug 25, 2018 2:23 pm

With the XJT module there is no need for the telemetry cable with the futaba connector.

My er9x/Ersky9x/eepskye Video Tutorials

Donate to Er9x/Ersky9x:

Post Reply

Return to “ersky9xr”