openrcforums

Welcome everyone !

sorry for my english from translator .-)

I`m using Turnigy 9xr PRO and ersky9xr. I recently purchased a gps module.

Example height on the display is 20.4, and the actual 204m. He speaks the correct height of 204m

It would be useful to change the speed units to kph .-)

Look below:
display 11.1 real altitude 111m


KTS change to KPH ?

(this is real speed my electric glider .-))

Photo: https://mega.nz/#F!2p1TzC6K!dqu6vPTBpdwoJARpOcF3mQ

I'll look to fix that in the next test version.
Regarding changing the units, you could use a Scaler to change the value, although you would need to display the Scaler on a custom screen to see it.
To add km/h, we will need to add a voice file as well as the text.

Mike.

It's enough to say the same value without units


Only 150.

No 150 (voice kmph) .-)

Very thanks .-)


PS
one more problem It does not save the max height on the gps screen.)
random values appear

MikeB wrote: ↑Mon Sep 18, 2017 2:46 pm
To add km/h, we will need to add a voice file as well as the text.

Mike.

Mike, file is already there.. "KM_HOUR.wav"
KM.wav (Kilometer), KMS.wav (Kilometers) and KMS_HOUR.wav (Kilometers per Hour) are also already there..

João

I've posted a "e6" test version. This should fix the GPS altitude display.

Mike.

Very thanks. I'm install new version and test .-)

GPS Altitude view Ok. Thank's

Maybe change kts to kph ?

Possibly in "e6", but is in "e7", you should find that Scalers support the use of "kms/h" as one of the units.
To convert from knots to kms/h, use knots * 1852 / 1000.

Mike.

Ok. Thank you