Orange OpenLRS module not working

ersky9xr is the port of the er9x firmware to the 9XRPRO radio.
Post Reply
stofferl
Posts: 11
Joined: Wed Jun 18, 2014 8:08 pm
Country: -

Orange OpenLRS module not working

Post by stofferl » Sat Aug 26, 2017 5:08 am

My Orange Orange TX module with openlrsng is not working with my recently purchased 9XR Pro Transmitter flashed with ErSky9x. It had Version R212 flashed then I tried the newest R220, still not working. The same module shows no problem when used in my older 9XR and 9X running on ER9X. The Radio also has no Problems with my various 2,4 GHz modules and even a rangelink UHF module works flawlessly. I wonder if the ErSky9x firmware has problems controlling the orange module with OpenLRSng, though I read People use These modules with 9XRpro.

Thanks


User avatar
MikeB
9x Developer
Posts: 17334
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Orange OpenLRS module not working

Post by MikeB » Sat Aug 26, 2017 9:13 am

I believe this uses PPM as the module protocol. Check the setting "PPM Drive" in the protocol and make sure it is set to "FullDrive". "OpenDrain" is only needed for the original Flysky/Turnigy module.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

stofferl
Posts: 11
Joined: Wed Jun 18, 2014 8:08 pm
Country: -

Re: Orange OpenLRS module not working

Post by stofferl » Sun Aug 27, 2017 6:27 pm

Thanks Mike, that solved the problem...now it works!

Chris


Post Reply

Return to “ersky9xr”