Firmware upgrade problem 9XR-PRO

ersky9xr is the port of the er9x firmware to the 9XRPRO radio.
Post Reply
menimich
Posts: 2
Joined: Fri Aug 18, 2017 2:03 am
Country: -

Firmware upgrade problem 9XR-PRO

Post by menimich » Fri Aug 18, 2017 2:12 am

Good evening, I have a problem with updating the firmware on the radio.
If you download "ersky9x for 9XR-PRO" no audio message and the firmware version reports: ersky9x-r220.
If you download "ersky9x for SKY board and AR9X board" the audio is working but still firmware version: ersky9x-r220. It's correct? What do I need to install on my radio?


User avatar
MikeB
9x Developer
Posts: 17340
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Firmware upgrade problem 9XR-PRO

Post by MikeB » Fri Aug 18, 2017 9:55 am

You want the one for the 9XR-PRO. The file should be ersky9xr_rom.bin. On the version screen, the "MOD" should show "REVB-X".

What revision are you upgrading from? If it is quite old, you may need to also put new voice files on the SD card. At some point I changed from numbered files to named files.

Odd, if on flashing the one for the 'PRO, the audio doesn't work. Is that all audio, or just voice and you hear beeps?

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

menimich
Posts: 2
Joined: Fri Aug 18, 2017 2:03 am
Country: -

Re: Firmware upgrade problem 9XR-PRO

Post by menimich » Fri Aug 18, 2017 1:33 pm

sorry,
The audio works but has changed the volume potentiometer. I've become stupid for that.
The 9xrpro firmware is correct.
With the other firmware review I had RTC not working and consequently telemetry.
Thanks so much


Post Reply

Return to “ersky9xr”