Does ELRS module work fully with 9xr pro?

[Brochovy]

Hello all, I hope everyone is doing well. I flashed ersky9xr revision 223 to the turnigy 9xr pro, and am wondering if an ELRS module will work at its full potential and baud rate with the 9xr pro? Also, will I be able to set the rf output power? Thanks in advance.

[MikeB]

I believe it is fully functional, however I only have a single ELRS module, and that is in "Lite" format, so I cannot test it in the 'PRO. The hardware of the 'PRO does support Crossfire and ELRS.

There is a script available for configuring the ELRS module, so all settings should be available.
My module and script work fine on transmitters with a 'Lite" module bay.

I haven't put V3 of the ELRS firmware on the module, I don't actually use ELRS, so I do rely on others to test it.

Mike

[Brochovy]

I believe it is fully functional, however I only have a single ELRS module, and that is in "Lite" format, so I cannot test it in the 'PRO. The hardware of the 'PRO does support Crossfire and ELRS.

There is a script available for configuring the ELRS module, so all settings should be available.
My module and script work fine on transmitters with a 'Lite" module bay.

I haven't put V3 of the ELRS firmware on the module, I don't actually use ELRS, so I do rely on others to test it.

Mike

Hello Mike, thanks a lot for the reply. Where can I find the scripts? Is it on the ELRS website or somewhere else? And by saying that the hardware of the pro does support elrs and crossfire, does it mean the module should theoretically work on full power? Sorry for all the questions, I'm quite new to all this, but I know that some transmitters does not support crossfire and elrs, and just want to make sure that I understand you correctly. Once more, thanks a lot.

[MikeB]

Scripts are here: viewtopic.php?f=7&t=10668.

I assume the module will work at full power, but I cannot test it myself. The script did allow setting the power when I tried it.

Mike

[Brochovy]

Scripts are here: viewtopic.php?f=7&t=10668.

I assume the module will work at full power, but I cannot test it myself. The script did allow setting the power when I tried it.

Mike

Hello, thanks a lot for the reply, I really appreciate all the help. God bless

[Brochovy]

Scripts are here: viewtopic.php?f=7&t=10668.

I assume the module will work at full power, but I cannot test it myself. The script did allow setting the power when I tried it.

Mike

Hello, sorry to bother you again. Just want to know if a crossfire module will work with the 9xr pro at full power? And if there are also any scripts I should load for the crossfire module to work? Thanks again for all the help, I truly appreciate it.

[OctavioS]

Scripts are here: viewtopic.php?f=7&t=10668.

I assume the module will work at full power, but I cannot test it myself. The script did allow setting the power when I tried it.

Mike

Hello, sorry to bother you again. Just want to know if a crossfire module will work with the 9xr pro at full power? And if there are also any scripts I should load for the crossfire module to work? Thanks again for all the help, I truly appreciate it.

It should at 400k.