csv.file

ersky9xr is the port of the er9x firmware to the 9XRPRO radio.
Post Reply
michel49
Posts: 156
Joined: Sun Oct 07, 2012 10:59 am
Country: -

csv.file

Post by michel49 » Mon Oct 05, 2020 12:42 pm

Which PC software I could use to display easily the graphic datas recorded with my PRO ?

Thanks

MP


User avatar
MikeB
9x Developer
Posts: 17242
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: csv.file

Post by MikeB » Mon Oct 05, 2020 1:39 pm

I tend to use Excel as I have it, but the .csv file will also open in OpenOffice.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

michel49
Posts: 156
Joined: Sun Oct 07, 2012 10:59 am
Country: -

Re: csv.file

Post by michel49 » Tue Oct 06, 2020 9:11 am

I have Open Office but I don't know how to use it to display grahical .csv files; maybe there is a lighter software, just a simple module dedicated to such a simple work ?

User avatar
MikeB
9x Developer
Posts: 17242
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: csv.file

Post by MikeB » Tue Oct 06, 2020 2:49 pm

I don't know of a simpler module for this.
In OpenOffice, I just open the .csv file (in the dialog just make sure the separator is set to "comma").
Then select the columns to display on a graph. e.g. If I want to graph the current, which is in the column headed with "K", I click on the K, and usually the elapsed time that is in column "B", so click on the "B" while holding the CTRL key down. You should now have two columns highlighted.
The just click on the "CHART" button. You get a graph displayed, together with a "Chart Wizard". In this I select "Line" as the "Chart Type", and the "Lines Only", then click the Finish button.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

michel49
Posts: 156
Joined: Sun Oct 07, 2012 10:59 am
Country: -

Re: csv.file

Post by michel49 » Wed Oct 07, 2020 9:02 am

Thanks Mike, I will try that...

I thought about the Companion module but, for some reason, it doesnot accept the .csv file recorded with the PRO; is there a way to simply mod the file to be compatible ?

MP


User avatar
MikeB
9x Developer
Posts: 17242
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: csv.file

Post by MikeB » Wed Oct 07, 2020 1:46 pm

Not sure if it is simple but first the headings of the first two columns need to be:
"Date,Time,"
then the data in the first two columns needs to be like:
2020-01-25,00:00:00.000

(note the time column doesn't have the ' character).
The date is year-month-day and the time must have all digits present.
With those changes, I succeeded in loading an erskyTx log file into openTx Companion V2.3.9.

I may be able to change the logging in erskyTx to produce this format, and/or I may be able to add the logfile display into eepskye.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
jhsa
Posts: 19382
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: csv.file

Post by jhsa » Wed Oct 07, 2020 2:10 pm

That would be cool Mike, thank you.

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
MikeB
9x Developer
Posts: 17242
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: csv.file

Post by MikeB » Wed Oct 07, 2020 2:41 pm

I've just posted a test version of erskyTx, for the 9XR-PRO, that formats the logfile so it displays in the openTx Companion logfile viewer.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

michel49
Posts: 156
Joined: Sun Oct 07, 2012 10:59 am
Country: -

Re: csv.file

Post by michel49 » Sun Oct 18, 2020 4:11 pm

Very good, thanks

MP

michel49
Posts: 156
Joined: Sun Oct 07, 2012 10:59 am
Country: -

Re: csv.file

Post by michel49 » Wed Oct 21, 2020 9:18 am

Hi Mike

Ihave a TH9X/AR9x , can I flash the same FW as the PRO one ?

MP

User avatar
MikeB
9x Developer
Posts: 17242
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: csv.file

Post by MikeB » Wed Oct 21, 2020 10:26 am

No, you need the test version I've just posted! (ersky9x_romLogGraph.zip)

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

michel49
Posts: 156
Joined: Sun Oct 07, 2012 10:59 am
Country: -

Re: csv.file

Post by michel49 » Sat Oct 24, 2020 8:59 am

Well, I have an issue, the flash stop before the end; I know the issue come from the bootloader but I don't know how to update it...

MP

User avatar
MikeB
9x Developer
Posts: 17242
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: csv.file

Post by MikeB » Sat Oct 24, 2020 9:22 am

What version of the bootloader do you have?
The method of updating the bootloader is to put the erskyTx .bin file on the SD card, in the "FIRMWARE" directory, start the radio in maintenance mode (horizontal trims held apart at power on), then select "Update Bootloader", select the file and confirm.
Clearly this will only work if the radio will run.
Do you have a copy of the firmware that was running on this radio, if so, flash that, then use the above method to update the bootloader, then flash the new firmware. Versions of erskyTx (ersky9x) up to and including R220 fit in the first 256K so should flash correctly, ersky9xs_rom.bin from R221 also fits in the first 256K.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

michel49
Posts: 156
Joined: Sun Oct 07, 2012 10:59 am
Country: -

Re: csv.file

Post by michel49 » Sun Oct 25, 2020 8:40 am

Many thanks, that is OK

MP


Post Reply

Return to “ersky9xr”