6 position switch ?

Hardware Support for the 9XR Pro
Post Reply
gatonini
Posts: 105
Joined: Mon Sep 14, 2015 1:56 pm
Country: -

6 position switch ?

Post by gatonini » Tue Sep 22, 2015 5:31 pm

I watched a video on utube today about a guy putting a 6 position switch into a tanaris radio. Seemed pretty easy. I then watched how to mod the 9xrpro for a 6 position switch why is it necessary to solder all the resistors around the outside of the switch for the pro and not have to do it for tanaris. Just wondering ?


SkyNorth
Posts: 958
Joined: Tue Dec 27, 2011 11:40 am
Country: -
Location: Mansfield , Ontario

Re: 6 position switch ?

Post by SkyNorth » Tue Sep 22, 2015 5:38 pm

The 6 pos switch that FrSky sell for the Taranis has a small pcb attached with the resistors on it.

gatonini
Posts: 105
Joined: Mon Sep 14, 2015 1:56 pm
Country: -

Re: 6 position switch ?

Post by gatonini » Tue Sep 22, 2015 5:53 pm

Then next question can it be installed into the 9xrpro

User avatar
MikeB
9x Developer
Posts: 16586
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: 6 position switch ?

Post by MikeB » Tue Sep 22, 2015 6:21 pm

erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

gatonini
Posts: 105
Joined: Mon Sep 14, 2015 1:56 pm
Country: -

Re: 6 position switch ?

Post by gatonini » Wed Sep 23, 2015 12:01 pm

According to what I see there Mike there are only two wires and you still added a resistor is that correct ?


User avatar
MikeB
9x Developer
Posts: 16586
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: 6 position switch ?

Post by MikeB » Wed Sep 23, 2015 12:20 pm

Yes.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

gatonini
Posts: 105
Joined: Mon Sep 14, 2015 1:56 pm
Country: -

Re: 6 position switch ?

Post by gatonini » Wed Sep 23, 2015 12:41 pm

You mentioned a 3 position change is there a guide for doing that somewhere Mike ?

alsand
Posts: 9
Joined: Tue Aug 11, 2015 9:55 pm
Country: Italy
Location: Torino

Re: 6 position switch ?

Post by alsand » Wed Sep 23, 2015 1:29 pm



Post Reply

Return to “Turnigy 9XR PRO radio”