9XR Pro can not active Trainer mode......

Hardware Support for the 9XR Pro
Post Reply
LazyB
Posts: 22
Joined: Sun Mar 10, 2019 3:01 am
Country: -

9XR Pro can not active Trainer mode......

Post by LazyB » Tue Apr 16, 2019 6:22 am

9XR Pro can not active Trainer mode one some model......

I have this Turnigy 9XR Pro using ersky9X-r221

The Trainer mode works perfectly on SYMA X5C drone but When I switch to other model that use FRSKY receiver, the Trainer Mode do not work.

but I can see all those 4 no. (Aileron, Elevator,Throttle and Rudder) on the Trainer menu while I move the Slave transmitter.

I have check all the setting of Trainer menu setting between Syma model and FRsky model its all the same.

have also tried different Switch for activating the Trainer mode, have tried Gear switch......it did not work.

Been thinking there might be some Bugs on the firmware of the transmitter...


User avatar
MikeB
9x Developer
Posts: 16583
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: 9XR Pro can not active Trainer mode......

Post by MikeB » Tue Apr 16, 2019 8:25 am

ersky9x supports 4 trainer "profiles", to allow for different student transmitters and different methods of receiving the trainer signal.
In the MODEL|PROTOCOL|TRAINER menu, there is a setting to select which profile to use, or OFF to use non of them.
Make sure this is set to the profile you wish to use. In the RADIO|TRAINER menu, you may give a name to each of the profiles and this will appear in the MODEL|PROTOCOL|TRAINER menu.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
jhsa
Posts: 18970
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: 9XR Pro can not active Trainer mode......

Post by jhsa » Tue Apr 16, 2019 8:28 am

Nope, no bugs, I use all sorts of trainer options in ersky9x , including bluetooth and SBUS, and all works.

If you see the trainer inputs moving in the trainer menu, it means the radio is receiving the trainer information.
So it must be something with your settings.

João

Sent from my BLN-L21 using Tapatalk


My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

LazyB
Posts: 22
Joined: Sun Mar 10, 2019 3:01 am
Country: -

Re: 9XR Pro can not active Trainer mode......

Post by LazyB » Wed Apr 17, 2019 1:52 am

Mike,

able to make it work and play with different profile of training mode......Thanks

Joao,

yes.....maybe I can use one of my Frsky Receiver set it to PPM mode and make a Male Phone Jack......its a wireless Training ..... Thanks

User avatar
MikeB
9x Developer
Posts: 16583
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: 9XR Pro can not active Trainer mode......

Post by MikeB » Wed Apr 17, 2019 9:27 am

You should find the "last" trainer source option is "JACK SBUS". This allows you to use a receiver that outputs SBUS as a wireless trainer and just connect the SBUS output to the jack socket.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!


User avatar
jhsa
Posts: 18970
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: 9XR Pro can not active Trainer mode......

Post by jhsa » Wed Apr 17, 2019 10:47 am

I have built a few very small DIY Frsky D8 compatible receivers, that just output SBUS, and installed them inside my radios..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW


Post Reply

Return to “Turnigy 9XR PRO radio”