Turnigy 9XR Pro Hang Up intermittently.....
Turnigy 9XR Pro Hang Up intermittently.....
Guys.....Turnigy 9XR PRO LCD display freeze intermittently.........some times it hang after 18 minutes, sometimes 25 minutes, or 80 minutes.
When the LCD display freeze up.......the gimbal stick can control the servo, Trim button also working, I can feel the vibrating motor vibrate on center trim.
https://youtu.be/jWRaKjZeX7c
When the LCD display freeze up.......the gimbal stick can control the servo, Trim button also working, I can feel the vibrating motor vibrate on center trim.
https://youtu.be/jWRaKjZeX7c
Re: Turnigy 9XR Pro Hang Up intermittently.....
But you lose all audio, right?
João
Sent from my BLN-L21 using Tapatalk
João
Sent from my BLN-L21 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Turnigy 9XR Pro Hang Up intermittently.....
Yes.......The Audio feedback beep tone is missing.......
I am still looking for the Schematic Diagram for 9XR Pro......
I am still looking for the Schematic Diagram for 9XR Pro......
Re: Turnigy 9XR Pro Hang Up intermittently.....
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Turnigy 9XR Pro Hang Up intermittently.....
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17992
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Turnigy 9XR Pro Hang Up intermittently.....
On the test versions thread is a special test version that uses logical switch LO (the last one) to reset the display.
Configure LO so it becomes ON when you have a physical switch ON, something like:
LO AND ELE ELE
See if when you get a freeze, this recovers the display.
Mike
Configure LO so it becomes ON when you have a physical switch ON, something like:
LO AND ELE ELE
See if when you get a freeze, this recovers the display.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Turnigy 9XR Pro Hang Up intermittently.....
Mike, what about the loss of audio?
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Turnigy 9XR Pro Hang Up intermittently.....
Joao, Thanks for the link, I was able to download the 9xr pro schematic diagram.
Have notice there is a common I/O pin from the main controller that control the LCD display and Audio Amplifier .......the LCD CS and LCD WR , (this is LCD chip select and write ) this 2 pin is connected thru a resistor to a Shut Down pin of Audio Amplifier........
Have notice there is a common I/O pin from the main controller that control the LCD display and Audio Amplifier .......the LCD CS and LCD WR , (this is LCD chip select and write ) this 2 pin is connected thru a resistor to a Shut Down pin of Audio Amplifier........
Re: Turnigy 9XR Pro Hang Up intermittently.....
This is the reason there is No Audio when the LCD Display is Freeze......
It could be a software or hardware problem.........
Hope somebody can just Turn On their Turnigy 9XR Pro for more than 2 hour and see the result........
It could be a software or hardware problem.........
Hope somebody can just Turn On their Turnigy 9XR Pro for more than 2 hour and see the result........
Re: Turnigy 9XR Pro Hang Up intermittently.....
I do apologize, I did say that I would do it but I still didn't have time
Will try to charge my radio's battery tomorrow and leave it on for a couple hours..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Turnigy 9XR Pro Hang Up intermittently.....
Probably too obvious but, have you tried to (carefully) disconnected and reinsert the flat wire that connects the LCD ?
Miguel
Miguel
We demand rigidly defined areas of doubt and uncertainty. Douglas Adams.
- MikeB
- 9x Developer
- Posts: 17992
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Turnigy 9XR Pro Hang Up intermittently.....
LCD-WR and LCD-CS1 are not actually connected to the LCD, the connections to the LCD are connected to ground.
Please try the test version I posted, set up LO to be able to reset the display and see if the display recovers.
If it does, I can add some debug we may then use to investigate the loss of audio.
Mike
Please try the test version I posted, set up LO to be able to reset the display and see if the display recovers.
If it does, I can add some debug we may then use to investigate the loss of audio.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- MikeB
- 9x Developer
- Posts: 17992
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Turnigy 9XR Pro Hang Up intermittently.....
My 'PRO has been running for 63 minutes (just sitting on the bench) with no problem so far. I only have a 7.2V 800mAH battery in it so the test may have to stop when the battery goes flat!
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Turnigy 9XR Pro Hang Up intermittently.....
What about if you remove the SD Card? Do you still see the same problem?
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: Turnigy 9XR Pro Hang Up intermittently.....
I've got 3 pro's . I'll turn them on and see what happens . JHSA if the loud alarm goes off I'm blaming you . LOL and Mike .
All 3 on at 3:05 central standard time
75 min. all is good (except the alarms )
All 3 on at 3:05 central standard time
75 min. all is good (except the alarms )
Re: Turnigy 9XR Pro Hang Up intermittently.....
My pro ran 2 1/2 hours without a problem
Display ans sound worked permanently
Reinhard
btw
Wouldn't i be an idea to power down the radio when you have Inactivity timeouts and low battery warning?
Display ans sound worked permanently
Reinhard
btw
Wouldn't i be an idea to power down the radio when you have Inactivity timeouts and low battery warning?
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: Turnigy 9XR Pro Hang Up intermittently.....
I ran them for almost 3 hours..everything is perfect.. so I don't know what could be wrong with his radio.
Allen
Allen
- MikeB
- 9x Developer
- Posts: 17992
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Turnigy 9XR Pro Hang Up intermittently.....
After a recharge, I ran my 'PRO for 2 hours with no problems.antlerhanger wrote: ↑Mon Mar 11, 2019 8:06 pm . JHSA if the loud alarm goes off I'm blaming you . LOL and Mike
In the alarms menu you may change the time to the inactivity alarm to uo to 120 minutes, and also change the volume setting for that alarm, so you may delay the alarm and make it quieter.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: Turnigy 9XR Pro Hang Up intermittently.....
I actually love the alarm . Just giving you a hard time . I had trouble with 2 of my sd cards that made the display do crazy things. One on a pro and 2 days ago on my x9dp . I wonder if that could be his problem . jhsa asked him about it earlier . Just a thought
Allen
Allen
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: Turnigy 9XR Pro Hang Up intermittently.....
Also when my screen was messing up I did lose audio at the same time .
Allen
Allen
Re: Turnigy 9XR Pro Hang Up intermittently.....
Guys......yes.....have perform a full clean up on Ribbon Cable going to LCD display......and also all the did perform Unplug , Spray all male and female connection with contact cleaner before plugging the connector.........even all the pin of St32 main controller have clean it up.
This after the 9xr pro have hang up again after less than 20 minutes of used.........this happen to me 2 times.
This Time I will remove the cheap 4GB no brand Micro SD card............hope this will work.........will update you.
This after the 9xr pro have hang up again after less than 20 minutes of used.........this happen to me 2 times.
This Time I will remove the cheap 4GB no brand Micro SD card............hope this will work.........will update you.
- MikeB
- 9x Developer
- Posts: 17992
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Turnigy 9XR Pro Hang Up intermittently.....
If you get the hangup, does the test version of the firmware I've posted allow you to get the display working again?
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Turnigy 9XR Pro Hang Up intermittently.....
Mike, have not yet tested on the test version firmware...........but look like have found the cause of hang up.
This time I removed the Micro SD card as suggest by Joao, this Micro SD card is just a Cheap No Brand just got it free from cheap camera drone.........I feel this might be causing the Hang Up.
OK, This morning I turned on the 9XR Pro, after 10 minutes now I can hear the irritating Beep sound , need to move the stick to keep it silent........then after 10 minutes again hear the Beep again.......need to move the stick again...........I never heard this Irritating Beep sound on the previus test with Micro Sd card install............now been for more than 99 minutes and it still running well.............now the timer loop back to 0 again.............
Still counting..............will just keep it on ........let you know further update............
THANKS to all of you........you are all very help full.
This time I removed the Micro SD card as suggest by Joao, this Micro SD card is just a Cheap No Brand just got it free from cheap camera drone.........I feel this might be causing the Hang Up.
OK, This morning I turned on the 9XR Pro, after 10 minutes now I can hear the irritating Beep sound , need to move the stick to keep it silent........then after 10 minutes again hear the Beep again.......need to move the stick again...........I never heard this Irritating Beep sound on the previus test with Micro Sd card install............now been for more than 99 minutes and it still running well.............now the timer loop back to 0 again.............
Still counting..............will just keep it on ........let you know further update............
THANKS to all of you........you are all very help full.
Re: Turnigy 9XR Pro Hang Up intermittently.....
It looks like you found the problem, well done
I did say that you would have better help here
By the way, without the SD Card you will get only beeps. The irritating beeps you hear is the inactivity alarm, in your case it might be set to about 10 minutes. It will warn you if you forgot the radio ON. Very useful if using a Lithium battery to power the radio. If a voice file named INACTV.wav is in the SD Card "voice/system" folder, it will be played instead.. If you don't have it, just make a file with some annoying siren, give it the name above, and place it in the correct folder.
João
I did say that you would have better help here
By the way, without the SD Card you will get only beeps. The irritating beeps you hear is the inactivity alarm, in your case it might be set to about 10 minutes. It will warn you if you forgot the radio ON. Very useful if using a Lithium battery to power the radio. If a voice file named INACTV.wav is in the SD Card "voice/system" folder, it will be played instead.. If you don't have it, just make a file with some annoying siren, give it the name above, and place it in the correct folder.
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Turnigy 9XR Pro Hang Up intermittently.....
Joao......Yes.....Thanks..........still running at 158 minutes.........
Will purchase any Branded microSD card.
Will purchase any Branded microSD card.
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: Turnigy 9XR Pro Hang Up intermittently.....
Glad you got it working . On both of my bad cards I was able to just copy the cards onto a new card and it worked fine .I don't know if that is the best way or not . You might be copying a problem file .It might be best to build a new card file structure . Mike or Joao will know the best way to do it .
Allen
Allen
Re: Turnigy 9XR Pro Hang Up intermittently.....
Allen, Yes.......That I would do.....cause thats the easies thing to do.........this is the first thing I will do.
If it hang up again. Then will have to download all the file.
My Turnigy still On since this morning ..... its already passed 1pm.....still counting.....its 241 minutes ..... 100 + 100 + 41 minutes.............
Look like the issue is really in the Cheap microSD card.........so lesson learn.....do not use those cheap MicroSD card.
If it hang up again. Then will have to download all the file.
My Turnigy still On since this morning ..... its already passed 1pm.....still counting.....its 241 minutes ..... 100 + 100 + 41 minutes.............
Look like the issue is really in the Cheap microSD card.........so lesson learn.....do not use those cheap MicroSD card.
- MikeB
- 9x Developer
- Posts: 17992
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Turnigy 9XR Pro Hang Up intermittently.....
Which country are you in? I'm wondering if I could (cheaply) have the bad SD card so I could investigate what hangs up.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: Turnigy 9XR Pro Hang Up intermittently.....
Out of 4 radios 2 had bad cards .They were the original cards . I replaced with class 10 and all is great. I don't know if that made a difference but they work .
Allen
Allen
Re: Turnigy 9XR Pro Hang Up intermittently.....
Guys......I got a Branded Sandisk 16 GB microSD card from my Raspberry Pie.........the MicroSD is perfectly working on Raspberry pie, I did not format it.
Then I turn On the 9XR Pro.......it works for more than 80 minutes .......it Did not Hand Up, but the Irritating Beep did not activate.....
I am just wondering if there is an Option in this 9XR pro. to automatically log a files, say Write the Date and Time upon the Transmitter is On and also log a files upon powering off........
I know there is an option for logging a Telemetry data files, but have not try it yet.........
Then I turn On the 9XR Pro.......it works for more than 80 minutes .......it Did not Hand Up, but the Irritating Beep did not activate.....
I am just wondering if there is an Option in this 9XR pro. to automatically log a files, say Write the Date and Time upon the Transmitter is On and also log a files upon powering off........
I know there is an option for logging a Telemetry data files, but have not try it yet.........