Page 1 of 1

Model transfer between radio's useing Bluetooth ?

Posted: Tue Feb 05, 2019 5:17 pm
by antlerhanger
Is there a way to copy Models between 9xr pro transmitters using Bluetooth ? I'm running ersky9xr latest test version . I have 3 pro's all with the bt installed and working (hc-05 ) as master or slave. It would be fantastic if this is possible.
Thanks once again
Allen

Re: Model transfer between radio's useing Bluetooth ?

Posted: Tue Feb 05, 2019 10:35 pm
by jhsa
have a look, just made this. I hope it helps :)

https://www.youtube.com/watch?v=xG194ryw38Q

João

Re: Model transfer between radio's useing Bluetooth ?

Posted: Tue Feb 05, 2019 11:16 pm
by antlerhanger
When I press run script , I have no files there to choose from .
It's just blank ..I'm sure its some setting I have wrong

Re: Model transfer between radio's useing Bluetooth ?

Posted: Tue Feb 05, 2019 11:53 pm
by jhsa
You probably don't have any model files on the SD Card. Try backing up some models first. On both radios, so the "Models" folder is created.

João

Re: Model transfer between radio's useing Bluetooth ?

Posted: Wed Feb 06, 2019 12:02 am
by MikeB
You also need the files filet.bas and filer.bas in a "\Scripts" directory on the SD card.
I've just added them on http://www.er9x.com/, see the link to "File Transfer" under scripts on the right side.

Mike

Re: Model transfer between radio's useing Bluetooth ?

Posted: Wed Feb 06, 2019 12:47 am
by antlerhanger
You guys are AMAZING ..It works perfect !! I had to remember to go to bt settings and change to script..But it works fantastic
Thanks Again
Allen

Re: Model transfer between radio's useing Bluetooth ?

Posted: Wed Feb 06, 2019 12:51 am
by antlerhanger
I had model files but needed the 2 files for the script ..Tested all 3 radio's and they work perfect

Re: Model transfer between radio's useing Bluetooth ?

Posted: Wed Feb 06, 2019 1:30 am
by jhsa
Great :) I believe you can also share voice files..

Mike, didn't you say that you have combined both "Filer.bas and Filet.bas"?? If you did, have you posted the new file??

Thanks

João

Re: Model transfer between radio's useing Bluetooth ?

Posted: Wed Feb 06, 2019 5:05 pm
by antlerhanger
So I added scripts to the file directory . I found out I also needed modelNames under voice ..What are the exact file directories to have on the sd card ?

All is working great thanks to you guys ,Just want to make sure I have everything

Thanks

Allen

Re: Model transfer between radio's useing Bluetooth ?

Posted: Wed Feb 06, 2019 5:46 pm
by jhsa
I would post a picture of my radio's folders but It seems i cannot upload files to the forum.. :(

João

Re: Model transfer between radio's useing Bluetooth ?

Posted: Wed Feb 13, 2019 10:44 pm
by MikeB
Yes I do have a single script that does both Tx and Rx. I will get around to posting it soon!
I have just managed to implement a new feature for this operation that will be in the next test version I post. If you use the file transfer script(s), and don't have either the COM2 function set to script or the bluetooth function set to script, then the bluetooth function will be temporarily change to "Script" so you may transfer the file(s), and it will change back to the original setting when the script terminates.

Mike

Re: Model transfer between radio's useing Bluetooth ?

Posted: Wed Feb 13, 2019 11:58 pm
by jhsa
Mike, on my radios bluetooth is on COM3, including the 9Xtreme (COM3 is I2c). Do you mean only the function will change temporarily, or also the COM port.
If the COM port also changes, I think it won't work on my radios.

I have COM1 for external modules, COM2 for internal modules and BT on COM3.
Changing function automatically is a great feature..
Thanks

João

Re: Model transfer between radio's useing Bluetooth ?

Posted: Thu Feb 14, 2019 12:38 am
by antlerhanger
My 3 radios have BT on com 3 ,com1 external and com 2 For internal

Allen

Re: Model transfer between radio's useing Bluetooth ?

Posted: Fri Feb 15, 2019 11:36 pm
by MikeB
No change to the COM ports, just the BT Function changes.
You have an option to use COM2 for scripts, if it is available, so you may connect two radios together using COM2 to transfer files.
If COM2 is NOT set to "Script", it won't be used.
If COM2 is set to "Script" and bluetooth is not set to script then COM2 is used.
If both are set to "Script", then BT is used.
If neither is set to "Script", then this change will temporarily set BT to script as soon as you try to receive anything in the script.

Mike

Re: Model transfer between radio's useing Bluetooth ?

Posted: Sat Feb 16, 2019 12:50 am
by jhsa
Cool, thanks Mike.. It is fully automatic now then :)
So, we can have BT set to whatever function we use it for, but when sending/receiving files , ersky9x will configure it to script, and change it back when finished.. Fantastic :)

Thank you

João