Irangex irx4 +
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Irangex irx4 +
So I finally got my pro to bind with lemon and orange rx but channel order is totally wrong..I know it must be something simple. My pro has the latest fw and I am in serial mode . I've tried TAER and aetr still puts throttle on channel 2..Any ideas ?
Allen
Allen
Re: Irangex irx4 +
The radio must always output AETR, the module remaps that to what each protocol's standard.
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: Irangex irx4 +
That's what I thought . The radio is set on AETR but it still has the output messed up
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: Irangex irx4 +
so by changing the first channel to 2 the output is right just no throttle..It should be set on one so I'm not getting something right
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Irangex irx4 +
Are you using erSky9x radio firmware ?
If so, you may find help here: (https://www.youtube.com/playlist?list=P ... qcuIqJXhb9).
If you are, you can bring your eeprom model setting into eepSkye.
Then show how you have your mixes setup.
I may be wrong, but think this is where you make CH 1 to be Throttle.
I think this is how to do it, is this how you have your mixes set ?
I am not sure what your proper CH assignment is.
If so, you may find help here: (https://www.youtube.com/playlist?list=P ... qcuIqJXhb9).
If you are, you can bring your eeprom model setting into eepSkye.
Then show how you have your mixes setup.
I may be wrong, but think this is where you make CH 1 to be Throttle.
I think this is how to do it, is this how you have your mixes set ?
I am not sure what your proper CH assignment is.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: Irangex irx4 +
So it was in the mixes..Just had to change to AETR and it fixed it..I knew it was something simple..Thanks for the help
Re: RE: Re: Irangex irx4 +
Selecting a different channel order does not affect existing mixes, only new ones. You will need to edit existing mixes manually if you want to change channel order..antlerhanger wrote:So it was in the mixes..Just had to change to AETR and it fixed it..I knew it was something simple..Thanks for the help
João
Sent from my BLN-L21 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: Irangex irx4 +
It's all working on both radio's ..Where can I find info to change my Taranis plus to ersky ? I absolutely love the software ..
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Irangex irx4 + (ersky9x for Taranis Plus)
ERSKY9X on Taranis: (https://openrcforums.com/forum/viewtopic.php?f=7&t=4582)
and (http://www.er9x.com/) you want ersky9x for Taranis Plus.
I believe you may need some different SD card files too.
Micro SD Card list of folder Directories, see here: (http://openrcforums.com/forum/viewtopic ... 34#p116982).
Voice Pack found here: (http://openrcforums.com/forum/viewtopic.php?f=7&t=7715).
Off Subject: Seem the Search is not working, any one else having this problem too.
and (http://www.er9x.com/) you want ersky9x for Taranis Plus.
I believe you may need some different SD card files too.
Micro SD Card list of folder Directories, see here: (http://openrcforums.com/forum/viewtopic ... 34#p116982).
Voice Pack found here: (http://openrcforums.com/forum/viewtopic.php?f=7&t=7715).
Off Subject: Seem the Search is not working, any one else having this problem too.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: Irangex irx4 +
Search was never great on these forums But you are right, it seems that it got worse
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW