Page 1 of 1
Irangex irx4 +
Posted: Sat Jan 26, 2019 7:10 am
by antlerhanger
So I finally got my pro to bind with lemon and orange rx but channel order is totally wrong..I know it must be something simple. My pro has the latest fw and I am in serial mode . I've tried TAER and aetr still puts throttle on channel 2..Any ideas ?
Allen
Re: Irangex irx4 +
Posted: Sat Jan 26, 2019 7:17 am
by Kilrah
The radio must always output AETR, the module remaps that to what each protocol's standard.
Re: Irangex irx4 +
Posted: Sat Jan 26, 2019 3:08 pm
by antlerhanger
That's what I thought . The radio is set on AETR but it still has the output messed up
Re: Irangex irx4 +
Posted: Sat Jan 26, 2019 5:23 pm
by antlerhanger
so by changing the first channel to 2 the output is right just no throttle..It should be set on one so I'm not getting something right
Re: Irangex irx4 +
Posted: Sat Jan 26, 2019 7:30 pm
by bob195558
Are you using erSky9x radio firmware ?
If so, you may find help here: (
https://www.youtube.com/playlist?list=P ... qcuIqJXhb9).
If you are, you can bring your eeprom model setting into eepSkye.
Then show how you have your mixes setup.
I may be wrong, but think this is where you make CH 1 to be Throttle.
I think this is how to do it, is this how you have your mixes set ?
I am not sure what your proper CH assignment is.
Re: Irangex irx4 +
Posted: Sat Jan 26, 2019 8:30 pm
by antlerhanger
So it was in the mixes..Just had to change to AETR and it fixed it..I knew it was something simple..Thanks for the help
Re: RE: Re: Irangex irx4 +
Posted: Sun Jan 27, 2019 12:31 am
by jhsa
antlerhanger wrote:So it was in the mixes..Just had to change to AETR and it fixed it..I knew it was something simple..Thanks for the help
Selecting a different channel order does not affect existing mixes, only new ones. You will need to edit existing mixes manually if you want to change channel order..
João
Sent from my BLN-L21 using Tapatalk
Re: Irangex irx4 +
Posted: Sun Jan 27, 2019 1:38 am
by antlerhanger
It's all working on both radio's ..Where can I find info to change my Taranis plus to ersky ? I absolutely love the software ..
Re: Irangex irx4 + (ersky9x for Taranis Plus)
Posted: Sun Jan 27, 2019 12:39 pm
by bob195558
ERSKY9X on Taranis: (
https://openrcforums.com/forum/viewtopic.php?f=7&t=4582)
and (
http://www.er9x.com/) you want
ersky9x for Taranis Plus.
I believe you may need some different SD card files too.
Micro SD Card list of folder Directories, see here: (
http://openrcforums.com/forum/viewtopic ... 34#p116982).
Voice Pack found here: (
http://openrcforums.com/forum/viewtopic.php?f=7&t=7715).
Off Subject: Seem the Search is not working, any one else having this problem too.
Re: Irangex irx4 +
Posted: Sun Jan 27, 2019 2:45 pm
by jhsa
Search was never great on these forums
But you are right, it seems that it got worse
João