Irangex irx4 +

[antlerhanger]

So I finally got my pro to bind with lemon and orange rx but channel order is totally wrong..I know it must be something simple. My pro has the latest fw and I am in serial mode . I've tried TAER and aetr still puts throttle on channel 2..Any ideas ?

Allen

[Kilrah]

The radio must always output AETR, the module remaps that to what each protocol's standard.

[antlerhanger]

That's what I thought . The radio is set on AETR but it still has the output messed up

[antlerhanger]

so by changing the first channel to 2 the output is right just no throttle..It should be set on one so I'm not getting something right

[bob195558]

Are you using erSky9x radio firmware ?
If so, you may find help here: (https://www.youtube.com/playlist?list=P ... qcuIqJXhb9).
If you are, you can bring your eeprom model setting into eepSkye.
Then show how you have your mixes setup.
I may be wrong, but think this is where you make CH 1 to be Throttle.
I think this is how to do it, is this how you have your mixes set ?
I am not sure what your proper CH assignment is.

[antlerhanger]

So it was in the mixes..Just had to change to AETR and it fixed it..I knew it was something simple..Thanks for the help

[jhsa]

So it was in the mixes..Just had to change to AETR and it fixed it..I knew it was something simple..Thanks for the help

Selecting a different channel order does not affect existing mixes, only new ones. You will need to edit existing mixes manually if you want to change channel order..

João

Sent from my BLN-L21 using Tapatalk

[antlerhanger]

It's all working on both radio's ..Where can I find info to change my Taranis plus to ersky ? I absolutely love the software ..

[bob195558]

ERSKY9X on Taranis: (https://openrcforums.com/forum/viewtopic.php?f=7&t=4582)
and (http://www.er9x.com/) you want ersky9x for Taranis Plus.
I believe you may need some different SD card files too.
Micro SD Card list of folder Directories, see here: (http://openrcforums.com/forum/viewtopic ... 34#p116982).
Voice Pack found here: (http://openrcforums.com/forum/viewtopic.php?f=7&t=7715).

Off Subject: Seem the Search is not working, any one else having this problem too.

[jhsa]

Search was never great on these forums But you are right, it seems that it got worse

João