Irangex irx4 +

Hardware Support for the 9XR Pro
Post Reply
antlerhanger
Posts: 106
Joined: Tue Dec 25, 2018 3:19 am
Country: United States

Irangex irx4 +

Post by antlerhanger » Sat Jan 26, 2019 7:10 am

So I finally got my pro to bind with lemon and orange rx but channel order is totally wrong..I know it must be something simple. My pro has the latest fw and I am in serial mode . I've tried TAER and aetr still puts throttle on channel 2..Any ideas ?

Allen


User avatar
Kilrah
Posts: 10048
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Irangex irx4 +

Post by Kilrah » Sat Jan 26, 2019 7:17 am

The radio must always output AETR, the module remaps that to what each protocol's standard.

antlerhanger
Posts: 106
Joined: Tue Dec 25, 2018 3:19 am
Country: United States

Re: Irangex irx4 +

Post by antlerhanger » Sat Jan 26, 2019 3:08 pm

That's what I thought . The radio is set on AETR but it still has the output messed up

antlerhanger
Posts: 106
Joined: Tue Dec 25, 2018 3:19 am
Country: United States

Re: Irangex irx4 +

Post by antlerhanger » Sat Jan 26, 2019 5:23 pm

so by changing the first channel to 2 the output is right just no throttle..It should be set on one so I'm not getting something right

User avatar
bob195558
Posts: 2083
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: Irangex irx4 +

Post by bob195558 » Sat Jan 26, 2019 7:30 pm

Are you using erSky9x radio firmware ?
If so, you may find help here: (https://www.youtube.com/playlist?list=P ... qcuIqJXhb9).
If you are, you can bring your eeprom model setting into eepSkye.
Then show how you have your mixes setup.
I may be wrong, but think this is where you make CH 1 to be Throttle.
I think this is how to do it, is this how you have your mixes set ?
I am not sure what your proper CH assignment is.
mixes_1234.jpg
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.

3D Printing upgrades with (CR10 3D Printer): (http://openrcforums.com/forum/viewforum.php?f=85).


antlerhanger
Posts: 106
Joined: Tue Dec 25, 2018 3:19 am
Country: United States

Re: Irangex irx4 +

Post by antlerhanger » Sat Jan 26, 2019 8:30 pm

So it was in the mixes..Just had to change to AETR and it fixed it..I knew it was something simple..Thanks for the help

User avatar
jhsa
Posts: 18850
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: RE: Re: Irangex irx4 +

Post by jhsa » Sun Jan 27, 2019 12:31 am

antlerhanger wrote:So it was in the mixes..Just had to change to AETR and it fixed it..I knew it was something simple..Thanks for the help
Selecting a different channel order does not affect existing mixes, only new ones. You will need to edit existing mixes manually if you want to change channel order.. :)

João

Sent from my BLN-L21 using Tapatalk

My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

antlerhanger
Posts: 106
Joined: Tue Dec 25, 2018 3:19 am
Country: United States

Re: Irangex irx4 +

Post by antlerhanger » Sun Jan 27, 2019 1:38 am

It's all working on both radio's ..Where can I find info to change my Taranis plus to ersky ? I absolutely love the software ..

User avatar
bob195558
Posts: 2083
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: Irangex irx4 + (ersky9x for Taranis Plus)

Post by bob195558 » Sun Jan 27, 2019 12:39 pm

ERSKY9X on Taranis: (https://openrcforums.com/forum/viewtopic.php?f=7&t=4582)
and (http://www.er9x.com/) you want ersky9x for Taranis Plus.
I believe you may need some different SD card files too.
Micro SD Card list of folder Directories, see here: (http://openrcforums.com/forum/viewtopic ... 34#p116982).
Voice Pack found here: (http://openrcforums.com/forum/viewtopic.php?f=7&t=7715).

Off Subject: Seem the Search is not working, any one else having this problem too.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.

3D Printing upgrades with (CR10 3D Printer): (http://openrcforums.com/forum/viewforum.php?f=85).

User avatar
jhsa
Posts: 18850
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Irangex irx4 +

Post by jhsa » Sun Jan 27, 2019 2:45 pm

Search was never great on these forums :) But you are right, it seems that it got worse :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW


Post Reply

Return to “Turnigy 9XR PRO radio”