9XR Pro not being detected in any simulator
9XR Pro not being detected in any simulator
I connected my 9XR Pro to Phoenix and Realflight via JR port using this cable https://www.aliexpress.com/item/1pcs-4I ... 4c4d4wgkBl
However, my TX is not being detected in either of the sims. I also tried connecting it through the FMS cable but that is not being recognised by my PC maybe de to lack of drivers.
However, my TX is not being detected in either of the sims. I also tried connecting it through the FMS cable but that is not being recognised by my PC maybe de to lack of drivers.
Re: 9XR Pro not being detected in any simulator
S500 + Pixhawk 1 clone + Mauch PM + C&T Telemetry adapter + 9XR-Pro (Taranis gimbals)/XJT/X8R
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: 9XR Pro not being detected in any simulator
What firmware do you have on the Tx, and what revision?
1. Is the radio operating in "student" mode, (power on just by plugging in the trainer cable)?
2. With ersky9x revision 221 and later, the USB port operates as a joystick when the radio is running normally.
Mike
1. Is the radio operating in "student" mode, (power on just by plugging in the trainer cable)?
2. With ersky9x revision 221 and later, the USB port operates as a joystick when the radio is running normally.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: 9XR Pro not being detected in any simulator
As far as I know Phoenix only works with the original TX that is supplied with the sim, to avoid piracy..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
9XR Pro not being detected in any simulator
Phoenix comes with a dongle for the trainer port that enables your transmitter to plug into the USB port. The dongle provides copy protection.
No dummy transmitter is supplied, though they did used to sell a package of Phoenix with a DX5e.
No dummy transmitter is supplied, though they did used to sell a package of Phoenix with a DX5e.
Re: 9XR Pro not being detected in any simulator
I thought they still supplied the TX.
So, anyway, that dongle might not work with Phoenix as it only accepts the original one as far as I know..
Or, the dongle might only work with older versions of the simulator.. The description mentions Phoenix 2.5. I don't know what the current version is..
João
So, anyway, that dongle might not work with Phoenix as it only accepts the original one as far as I know..
Or, the dongle might only work with older versions of the simulator.. The description mentions Phoenix 2.5. I don't know what the current version is..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
9XR Pro not being detected in any simulator
Phoenix appears to have been discontinued since earlier in 2018. The last version was 5.5. Version 2.5 is several years old.
As far as I know, the dongle works only with Phoenix. I have a dongle from version 1 and it still works with version 5.
Edit: I’m referring to the Phoenix genuine dongle, not the Orange one mentioned above.
As far as I know, the dongle works only with Phoenix. I have a dongle from version 1 and it still works with version 5.
Edit: I’m referring to the Phoenix genuine dongle, not the Orange one mentioned above.
Last edited by Daedalus66 on Mon Oct 08, 2018 12:41 pm, edited 1 time in total.
Re: 9XR Pro not being detected in any simulator
I was talking about the 3rd party dongle from aliexpress mentioned by the OP
That is not an original Phoenix dongle
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
Re: 9XR Pro not being detected in any simulator
Here’s some info on the state of Phoenix:
https://www.rcgroups.com/forums/showpos ... stcount=55
https://www.rcgroups.com/forums/showpos ... stcount=55
Re: 9XR Pro not being detected in any simulator
My friend has a X9D plus and it works with this 3rd party dongle with Phoenix. I am using ERSKY9X rev 221.
Re: 9XR Pro not being detected in any simulator
Do you use a 9XR Pro?Daedalus66 wrote: ↑Mon Oct 08, 2018 12:41 pm Phoenix appears to have been discontinued since earlier in 2018. The last version was 5.5. Version 2.5 is several years old.
As far as I know, the dongle works only with Phoenix. I have a dongle from version 1 and it still works with version 5.
Edit: I’m referring to the Phoenix genuine dongle, not the Orange one mentioned above.
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: 9XR Pro not being detected in any simulator
Try changing the polarity of the trainer output and/or reducing the number of channels below 8.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: 9XR Pro not being detected in any simulator
Please confirm you are plugging the trainer cable in WITHOUT switching the 'PRO on.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: 9XR Pro not being detected in any simulator
Some sim dongles don't like more than 4 channels..
João
Sent from my BLN-L21 using Tapatalk
João
Sent from my BLN-L21 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: 9XR Pro not being detected in any simulator
Have you tried changing the "Delay" value from 300uS to 400uS?
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: 9XR Pro not being detected in any simulator
But you said:
Mike
so I'm now confused!
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: 9XR Pro not being detected in any simulator
I was using ERSKY9X back then. I then upgraded it to OpenTX to see if there are any changes but no luck. I don't know if it is a software issue, hardware issue or dongle issue.
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: 9XR Pro not being detected in any simulator
Please confirm your friend's X9D Plus works with YOUR dongle, or does his work with his dongle and has not been tested with yours?
You could upgrade back to ersky9x so you may change the delay value as I suggested.
Mike
You could upgrade back to ersky9x so you may change the delay value as I suggested.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: 9XR Pro not being detected in any simulator
I will try using the X9D with my dongle and will let you know. Can you suggest me a good alternative to a dongle which will work 100% with the 9XR Pro?