Hi all
Had this problem previously and solved it, however I'm on a competition w/e and my notes are in the house(message there somewhere!)
How is it done, which menu and where?
The rockers I refer to are under and at the sides of the gimbals.
Fine tune rockers locked how to unlock?
- stotty1111
- Posts: 233
- Joined: Mon Aug 11, 2014 5:56 pm
- Country: France
- Location: overlooking Douarnenez Bay Finistere
Re: Fine tune rockers locked how to unlock?
Those are the trims, I suppose?
What firmware are you using on your radio?
Ersky9x or OpenTX?
João
What firmware are you using on your radio?
Ersky9x or OpenTX?
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- stotty1111
- Posts: 233
- Joined: Mon Aug 11, 2014 5:56 pm
- Country: France
- Location: overlooking Douarnenez Bay Finistere
Re: Fine tune rockers locked how to unlock?
yeap(couldn't think of the proper name), Ersky9x r220
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Fine tune rockers locked how to unlock?
First check in the "DiagSwtch" menu the trim switches are responding, then check your mixes to see you have "Include Trim" set.
Test for trim movement in FLight Mode 0.
Mike
Test for trim movement in FLight Mode 0.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- stotty1111
- Posts: 233
- Joined: Mon Aug 11, 2014 5:56 pm
- Country: France
- Location: overlooking Douarnenez Bay Finistere
Re: Fine tune rockers locked how to unlock?
Ok, got 3 trimmers working the lhs horizontal isn't, however in dia swi the trimmer indicates a 0 -> 1 when manipulated - where to now?
Re: Fine tune rockers locked how to unlock?
Check the mixes as Mike suggested.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- stotty1111
- Posts: 233
- Joined: Mon Aug 11, 2014 5:56 pm
- Country: France
- Location: overlooking Douarnenez Bay Finistere
Re: Fine tune rockers locked how to unlock?
haven't got any mixes - however cracked it, by clearing the mix setups and reconfiguring - a bit of a ball acher but it workrd, my chum jean pierre (his tx) sends a thank you for your time and effort, We can now get practising for tomorrows completion(model boat steering etc)
And a big thanks from me as well!
And a big thanks from me as well!
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
Fine tune rockers locked how to unlock?
“Haven’t got any mixes.”
With ER9X, etc., you’ve always got mixes. They are what’s found on the Mixer page. Without mixes, nothing happens.
You’re thinking about traditional radios, where “mixes” are something optional that you use to do things like couple the rudder to aileron action.
With ER9X, etc., you’ve always got mixes. They are what’s found on the Mixer page. Without mixes, nothing happens.
You’re thinking about traditional radios, where “mixes” are something optional that you use to do things like couple the rudder to aileron action.