Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Hardware Support for the 9XR Pro
Sterling101
Posts: 143
Joined: Sat Dec 02, 2017 10:32 am
Country: United Kingdom
Location: Nottingham, UK
Contact:

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by Sterling101 »

Got it and tested. Seems to be reading right now on both voltage sensors.

Thanks for your work on this Mike - makes a massive difference working with kit that I know as well as learning the ins and outs of the FrSky stuff I've got now.
Leigh

Current Kit:-
Taranis X9D plus running ErSkyTx - main radio.
Turnigy 9XR-Pro with internal FrSky DHT Module - used on the simulator.
Retired radios:-
Turnigy i10 with FlySky receivers.
Turnigy I6 - My first Tx now just used on Quads.

User avatar
MikeB
9x Developer
Posts: 17979
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by MikeB »

OK, you should now also be able to display Cus1, Cus2 and Cus3 on a custom display, and see what they show if you get a poor link.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
Sterling101
Posts: 143
Joined: Sat Dec 02, 2017 10:32 am
Country: United Kingdom
Location: Nottingham, UK
Contact:

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by Sterling101 »

Finally have had chance to fly with the new firmware on the Tx and module and I can report it works perfectly.

Pascal has one of my receivers that has caused problems with the stock Global ID to test with but I'm happy enough for now. Everything is working well and the additions of the telemetry items are really useful just for general monitoring as I'm used to seeing the values on the i10 transmitters so can relate to them easily.
Leigh

Current Kit:-
Taranis X9D plus running ErSkyTx - main radio.
Turnigy 9XR-Pro with internal FrSky DHT Module - used on the simulator.
Retired radios:-
Turnigy i10 with FlySky receivers.
Turnigy I6 - My first Tx now just used on Quads.
michel49
Posts: 192
Joined: Sun Oct 07, 2012 10:59 am
Country: -

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by michel49 »

I just flashed the 221g6 fw on my 9XRPRO and I can only display rssi 75, tssi 246 and Rx voltage but none of my two sensors; I use both STM and 328 4-1 module.
Is there something to do ?
User avatar
MikeB
9x Developer
Posts: 17979
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by MikeB »

What are the two sensors you are using? I don't have any AFHDS2A hardware, so will need this information, possibly together with a raw log of the telemetry data to see what needs to be decoded.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

michel49
Posts: 192
Joined: Sun Oct 07, 2012 10:59 am
Country: -

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by michel49 »

I use the FS-CVT01 (voltage) & TGY-CAT01 (altitude).

MP
User avatar
MikeB
9x Developer
Posts: 17979
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by MikeB »

The problem is we don't know the identifier and format of this telemetry data. Please create a raw log file of the telemetry data so I can try to work out what these might be. Go here: http://openrcforums.com/forum/viewtopic ... ng#p123508, to see how to crate a raw log file. The DEBUG menu is UP LONG, then left or right a few times from the main screen.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
michel49
Posts: 192
Joined: Sun Oct 07, 2012 10:59 am
Country: -

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by michel49 »

OK Mike, I will do that but I do apologosise for the delay: in my french farwest the web don't work all the days...
If you agree I could send you the Rx and the sensors, it would be easier, I purchased it just for experimentation.

MP
User avatar
MikeB
9x Developer
Posts: 17979
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by MikeB »

Try a raw log file first please.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
Sterling101
Posts: 143
Joined: Sat Dec 02, 2017 10:32 am
Country: United Kingdom
Location: Nottingham, UK
Contact:

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by Sterling101 »

Did a quick test tonight after doing a bit of rewiring on one of the planes and decided to put a low pack voltage alarm in place. I've noticed that the FasV value seems to be flickering quite a bit. I can almost make out it flicking down to 0.0 but it happens so quick it's hard to tell properly.

I've attached a raw log of it happening, but not sure it'll catch it at all. Not noticed it before, but then again I've only just got this model set up and it's had 3 flights in total so most of the time I was concentrating on trims and control throws instead of pack voltage (which in hindsight was a bad idea as I hit low voltage cutout on the last flight!).

Currently I'm running 221 release version, not a test version so don't know if there's been many changes since that release but I'll be led by Mike's guidance on that :)
Leigh

Current Kit:-
Taranis X9D plus running ErSkyTx - main radio.
Turnigy 9XR-Pro with internal FrSky DHT Module - used on the simulator.
Retired radios:-
Turnigy i10 with FlySky receivers.
Turnigy I6 - My first Tx now just used on Quads.
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by jhsa »

What sensor do you have on the plane?

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Sterling101
Posts: 143
Joined: Sat Dec 02, 2017 10:32 am
Country: United Kingdom
Location: Nottingham, UK
Contact:

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by Sterling101 »

jhsa wrote: Sun Apr 01, 2018 8:55 pm What sensor do you have on the plane?

João
This one has the FlySky AVT-01 voltage sensor. Same one I've used on a couple of others. Need to do a test on my plane with the CVT-01 voltage sensor and see if that performs differently but that may have to wait until morning as it's buried in the hangar :)
Leigh

Current Kit:-
Taranis X9D plus running ErSkyTx - main radio.
Turnigy 9XR-Pro with internal FrSky DHT Module - used on the simulator.
Retired radios:-
Turnigy i10 with FlySky receivers.
Turnigy I6 - My first Tx now just used on Quads.
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by jhsa »

I use Frsky receivers, multi module and the oXs (openXsensor) on most of my models. All radios with Ersky9x latest test version. My FasV behaves properly..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Sterling101
Posts: 143
Joined: Sat Dec 02, 2017 10:32 am
Country: United Kingdom
Location: Nottingham, UK
Contact:

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by Sterling101 »

The FasV on the AFHDS2A receivers is populated from a different telemetry source to the FrSky ones. Probably where the difference is coming in.
I've just found the new 222a4 release (hadn't realised the test thread was live again) so have uploaded that and will give it a test now...
Leigh

Current Kit:-
Taranis X9D plus running ErSkyTx - main radio.
Turnigy 9XR-Pro with internal FrSky DHT Module - used on the simulator.
Retired radios:-
Turnigy i10 with FlySky receivers.
Turnigy I6 - My first Tx now just used on Quads.
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by jhsa »

yeah, Rob solved the problem with the forum that prevented us from uploading more than one file.. Now all is good again :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Sterling101
Posts: 143
Joined: Sat Dec 02, 2017 10:32 am
Country: United Kingdom
Location: Nottingham, UK
Contact:

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by Sterling101 »

Just tested on 222a4 and it's still the same. Fast flickering between 16v and 0.0v.
Leigh

Current Kit:-
Taranis X9D plus running ErSkyTx - main radio.
Turnigy 9XR-Pro with internal FrSky DHT Module - used on the simulator.
Retired radios:-
Turnigy i10 with FlySky receivers.
Turnigy I6 - My first Tx now just used on Quads.
User avatar
MikeB
9x Developer
Posts: 17979
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by MikeB »

A raw telemetry log (not actually attached a few posts back) should help me pin this down.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
Sterling101
Posts: 143
Joined: Sat Dec 02, 2017 10:32 am
Country: United Kingdom
Location: Nottingham, UK
Contact:

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by Sterling101 »

Sorry about that Mike - I'd completely missed it out!

Here's the log file...
Taranis-2018-04-01-212135.zip
(761 Bytes) Downloaded 412 times
Leigh

Current Kit:-
Taranis X9D plus running ErSkyTx - main radio.
Turnigy 9XR-Pro with internal FrSky DHT Module - used on the simulator.
Retired radios:-
Turnigy i10 with FlySky receivers.
Turnigy I6 - My first Tx now just used on Quads.
User avatar
MikeB
9x Developer
Posts: 17979
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by MikeB »

I can't see why this is happening, the raw data looks OK. You could go to the Telemetry|Logging menu and check the "tick" at the right of the screen for FasV. Is this solid or is it flickering?
It seems the FasV value may be being set from two places, I may need create a special test firmware to try to find where this may be happening. I assume you don't have any scripts running.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
Sterling101
Posts: 143
Joined: Sat Dec 02, 2017 10:32 am
Country: United Kingdom
Location: Nottingham, UK
Contact:

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by Sterling101 »

The tick is solid at the right of FasV in the logging menu.

Have tried another receiver/sensor and I still see the same problem with the voltage flicking back to 0.0.

No scripts running at all, in fact the test I've just done has nothing other than a bound receiver and sensor.
Leigh

Current Kit:-
Taranis X9D plus running ErSkyTx - main radio.
Turnigy 9XR-Pro with internal FrSky DHT Module - used on the simulator.
Retired radios:-
Turnigy i10 with FlySky receivers.
Turnigy I6 - My first Tx now just used on Quads.
User avatar
MikeB
9x Developer
Posts: 17979
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by MikeB »

One last check before I try to build a test version, please confirm you don't have a scaler set to write to the FasV value.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
Sterling101
Posts: 143
Joined: Sat Dec 02, 2017 10:32 am
Country: United Kingdom
Location: Nottingham, UK
Contact:

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by Sterling101 »

Just checked and definitely no scalers doing anything to any value at all.
Leigh

Current Kit:-
Taranis X9D plus running ErSkyTx - main radio.
Turnigy 9XR-Pro with internal FrSky DHT Module - used on the simulator.
Retired radios:-
Turnigy i10 with FlySky receivers.
Turnigy I6 - My first Tx now just used on Quads.
User avatar
MikeB
9x Developer
Posts: 17979
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by MikeB »

OK, I've sent you a test version in a PM.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
ed4353
Posts: 1
Joined: Sun Jun 16, 2019 11:52 am
Country: -

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by ed4353 »

Hello all...
I'm new to erskytx, but learning a lot. However, one thing is giving me trouble.
I'm running the latest r222 firmware on a QX7 (I didn't see anything about this in the QX7 forum), and version 1.2.1.61 on the Banggood multiprotocol module.
I'm using an fs-ia6b receiver, and a CVT-01 battery voltage sensor.
Can someone tell me (or point me to a document) describing how to set it up in ERSkyTx?
RSSI seems to be working, so it looks like telemetry is working.
Thank you for your time.

Ed
phil
Posts: 119
Joined: Thu Jan 14, 2016 7:03 am
Country: Germany
Location: München
Contact:

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by phil »

MikeB wrote: Mon Apr 02, 2018 2:21 pm OK, I've sent you a test version in a PM.

Mike
Hello Mike, I couldn't find out if the display works with CAT01. If so, I would ask you to send me a test version for erskyTx. Send transmitter Frsky taranis and 9XR PRO. Thanks Phil
User avatar
MikeB
9x Developer
Posts: 17979
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by MikeB »

What is "CAT01"?

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
bob195558
Posts: 2376
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by bob195558 »

Found this info: https://www.flysky-cn.com/cat01-canshu

Product Model: FS-CAT01

Product name: Altitude sensor

Altitude measurement range:
0 ~ 8000m / 40 ~ 100kPa

Power:
4.0 ~ 8.4V

Data port:
i.bus / (sens)

Temperature range: 0 ℃ — + 60 ℃

Humidity range: 20% -95%

Dimensions: 31 * 15 * 8.5mm

Weight:
5.3g

This also: https://hobbyking.com/en_us/attitude-se ... r-i10.html
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
phil
Posts: 119
Joined: Thu Jan 14, 2016 7:03 am
Country: Germany
Location: München
Contact:

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by phil »

is a height sensor, Bob sent the data
User avatar
MikeB
9x Developer
Posts: 17979
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by MikeB »

I probably need to handle Flysky extended telemetry for that to work. To help me it would be useful to see the raw telemetry data from the device.

Set up a logging switch, then go to the DEBUG menu (UP LONG then RIGHT a few times) and press MENU LONG twice to Raw logging to "Hex".
Now, with everything running, turn the logging on for (say) 10 seconds, then turn it off.
Find the log file, zip it up and either post it or send it to me.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
phil
Posts: 119
Joined: Thu Jan 14, 2016 7:03 am
Country: Germany
Location: München
Contact:

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Post by phil »

hello Mike I can't handle the "logging switch". how to set the switch and what to activate. thank you, greetings phil

Post Reply

Return to “Turnigy 9XR PRO radio”