Using higher PPM inputs for head tracker?

Hardware Support for the 9XR Pro
Posts: 19
Joined: Mon Apr 28, 2014 12:38 pm
Country: -

Configuring higher PPM inputs for head tracker

Post by Bosshawg » Fri Sep 08, 2017 11:03 am

I have two Diy headtrackers one is configured for 8 & other for 12 both work with an
Ar9x with Multi-module or a Taranis.(just Tryed)
With the Diy_headtracker sketch loaded in Arduino look 4 Config.h page scroll down past the

// -- End of user-configurable parameters.
line to here
// Number of PPM channels out. 1 - 12 channels supported.
#define NUMBER_OF_CHANNELS 8 (change to 12)

save and upload sketch to your headtracker then recalibrate with the GUI.
The GUI cannot configure the amount of channels to output.
This works 4 me hope it is of help. :)

Posts: 15
Joined: Tue Jan 17, 2017 4:07 pm
Country: -

Re: Using higher PPM inputs for head tracker?

Post by Rally205 » Fri Sep 08, 2017 6:26 pm

Bingo! Sorted. Thanks for that :D

Post Reply

Return to “Turnigy 9XR PRO radio”