Flashing R9 Slim Rx fails

Hardware Support for the 9XR Pro
Post Reply
Rally205
Posts: 17
Joined: Tue Jan 17, 2017 4:07 pm
Country: -

Flashing R9 Slim Rx fails

Post by Rally205 » Wed Mar 09, 2022 12:24 pm

Help someone please :? . I am trying to flash an R9 Slim + OTA with ACCST Flex firmware. Its is an ACCESS Rx but I am told that it can be flashed with ACCST. I am following the usual procedure that always works for me and flashing via S.Port pin in the module bay. Enter into Run Maintenance, Update S.Port, select correct .FRK file and press enter. When radio says finding connect +5v. Radio says flashing and freezes. Rx blinks red led.
I then have to press exit and it says Failed. I have double checked all connections etc but it just won't work. Is it not possible to flash this Rx with this firmware or is it something else?
I have attached a pic of the screen where it hangs. I am running ersky9x-r222, 06/03/20, revb-x
Attachments
20220309_115848[1].jpg
(3.06 MiB) Not downloaded yet


Rally205
Posts: 17
Joined: Tue Jan 17, 2017 4:07 pm
Country: -

Re: Flashing R9 Slim Rx fails

Post by Rally205 » Wed Mar 09, 2022 12:49 pm

Never mind. Upgraded my Tx to R223 and it has now flashed the Rx. I don't know why that should make a difference but it has so all good :D

Post Reply

Return to “Turnigy 9XR PRO radio”