Flashing Frsky XJT firmware via 9XR Pro

Hardware Support for the 9XR Pro
Post Reply
rsilk49
Posts: 105
Joined: Wed Oct 26, 2016 10:33 am
Country: United Kingdom

Flashing Frsky XJT firmware via 9XR Pro

Post by rsilk49 » Thu Nov 28, 2019 6:19 pm

Since I have been able to flash my receivers, I now would like to flash the external XJT module.
I came across a reference to this how-to and would like confirmation that this technique still works as documented before I take the plunge.

http://thrustworx.com/frsky-xjt-firmwar ... y-9xr-pro/
S500 + Pixhawk 1 clone + Mauch PM + C&T Telemetry adapter + 9XR-Pro (Taranis gimbals)/XJT/X8R


User avatar
MikeB
9x Developer
Posts: 16635
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Flashing Frsky XJT firmware via 9XR Pro

Post by MikeB » Thu Nov 28, 2019 6:38 pm

Yes, that looks to be exactly correct. The turning the power off bit turns the power to the module off so you get to turn it back on when at the finding device stage.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

Post Reply

Return to “Turnigy 9XR PRO radio”