Help with 9xr pro

Hardware Support for the 9XR Pro
Post Reply
antlerhanger
Posts: 157
Joined: Tue Dec 25, 2018 3:19 am
Country: United States

Help with 9xr pro

Post by antlerhanger » Sat Feb 23, 2019 10:40 pm

A friend brought me his pro. It is not working..It will turn on and backlight and ready light comes on..R9 is good and I have bat voltage going to main board and 5v coming from the reg. on main board ..It just has a blank screen . Sd card is good as I installed it into one of my pro's and all is good. I can't get anything when I try to start in bootloader . Pc knows when I plug it in (the tone sounds ) but no drives show up . He said it was working last night and this morning when he turned it on he got nothing on screen and no sound . Any help will be appreciated :?: :?: :?: :shock:

Thanks again
Allen


User avatar
Kilrah
Posts: 10229
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Help with 9xr pro

Post by Kilrah » Sat Feb 23, 2019 10:46 pm

See here, he probably pressed the ERASE button and wiped the firmware.

viewtopic.php?f=95&t=11697&p=142766#p142766

antlerhanger
Posts: 157
Joined: Tue Dec 25, 2018 3:19 am
Country: United States

Re: Help with 9xr pro

Post by antlerhanger » Sat Feb 23, 2019 10:49 pm

That's what I was thinking also. Thanks Kilrah I'll check it out and report back

antlerhanger
Posts: 157
Joined: Tue Dec 25, 2018 3:19 am
Country: United States

Re: Help with 9xr pro

Post by antlerhanger » Sun Feb 24, 2019 3:44 am

SO..no luck..I am doing something wrong..Still nothing on the screen..I don't understand the sam-ba procedure at all..I download the program then what ? I am lost

User avatar
jhsa
Posts: 18969
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Help with 9xr pro

Post by jhsa » Sun Feb 24, 2019 11:55 am

Have a look at this..

João
Attachments
Using SAM-BA with 9XR Pro 05.pdf
(220.61 KiB) Downloaded 21 times
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW


User avatar
jhsa
Posts: 18969
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Help with 9xr pro

Post by jhsa » Sun Feb 24, 2019 12:00 pm

Or even better, use the Ar9x document, it is a bit more recent. I think the Ar9x has the same processor as the 9XR-PRO.

João
Attachments
SAMBA_AR9xARUni.pdf
(680.57 KiB) Downloaded 24 times
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

antlerhanger
Posts: 157
Joined: Tue Dec 25, 2018 3:19 am
Country: United States

Re: Help with 9xr pro

Post by antlerhanger » Sun Feb 24, 2019 2:52 pm

That worked perfect . It's back up and running . Where I got hung up is type of board

Thanks
Allen

User avatar
jhsa
Posts: 18969
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Help with 9xr pro

Post by jhsa » Sun Feb 24, 2019 5:08 pm

Wonderful :) Well done ;) :D

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

EddieSmith
Posts: 1
Joined: Sun Sep 08, 2019 5:29 am
Country: -

Re: Help with 9xr pro

Post by EddieSmith » Sun Sep 08, 2019 5:40 am

Hi ... I seem to have a problem with my rudder and elevator sticks being reversed.
ie ... the rudder movement operates the elevator on the home screen.

Has the Tx just been assembled incorrectly or can the sticks be changed over through the software ?

Eddie

User avatar
jhsa
Posts: 18969
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Help with 9xr pro

Post by jhsa » Sun Sep 08, 2019 10:51 am

More details please. What firmware and what version of it your radio has installed?

João

Sent from my BLN-L21 using Tapatalk

My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW


Post Reply

Return to “Turnigy 9XR PRO radio”