Trouble after successful flash of Tx and Rx

OpenLRSng runs on a number of different platforms. Find out more / post your questions here.

Moderator: kha

Post Reply
Posts: 1
Joined: Sun Dec 06, 2015 6:51 pm
Country: -

Trouble after successful flash of Tx and Rx

Post by charosenz » Sat Mar 04, 2017 6:57 am

I have used the chrome configurator for years with mostly hawkeye, dtfuhf and orange products but after recently buying a new orange Rx and Tx, I have trouble. The Rx and Tx flash fine but I now get a solid tone when I try to connect, indicating something is wrong. I also cannot get the radio (9xr) to give the beeps to get it in to bind mode even after holding down the button.

I have an 8 minute video of the flash and then the problem when trying to connect.

I would appreciate some help.


Post Reply

Return to “OpenLRSng hardware”