openLRSng with cleanflight/betaflight
Posted: Mon Feb 08, 2016 11:57 am
Hi,
last weekend i tried to connect openLRSng to cleanflight/beatflight but without success. I tried different Serial RX Provider in cleanflight/betaflight in combination with different transmitter/receiver settings in the openLRSng "Google Chrome configurator". The receiver was successful bound to my transmitter and my logic analyzer showed some data on the receiver-ports ( PPM Port and TX-Port) while i was moving the transmitter-Sticks.
On my target FC (SciSky, disconnected DSM2 RX) I have a Serial Port (RX/TX). I tried to connect the PPM-Port from my receiver (submicroLRS) to the FC RX Port and also the TX-Port from my receiver to the FC RX Port. But my Stick movements doesn't appear in the cleanflight configurator.
Regarding the physical connections I am totally guessing how it works. I am also totally lost in terms of the different protocols (CPPM/PPM/PPMSum/SPEKTRUM1024/SPEKTRUM2048/SBUS/SUMD/SUMH/XBUS_MODE_B/XBUS_MODE_B_RJ01) which one is the best choice to communicate between openLRSng (cleanflight/betaflight)?
IS the submicroLRS telemetry capable?
Would be nice if someone could tell me a bit of this Stuff or give me something to read.
Thanks a lot!
Cheers,
AlexF.
last weekend i tried to connect openLRSng to cleanflight/beatflight but without success. I tried different Serial RX Provider in cleanflight/betaflight in combination with different transmitter/receiver settings in the openLRSng "Google Chrome configurator". The receiver was successful bound to my transmitter and my logic analyzer showed some data on the receiver-ports ( PPM Port and TX-Port) while i was moving the transmitter-Sticks.
On my target FC (SciSky, disconnected DSM2 RX) I have a Serial Port (RX/TX). I tried to connect the PPM-Port from my receiver (submicroLRS) to the FC RX Port and also the TX-Port from my receiver to the FC RX Port. But my Stick movements doesn't appear in the cleanflight configurator.
Regarding the physical connections I am totally guessing how it works. I am also totally lost in terms of the different protocols (CPPM/PPM/PPMSum/SPEKTRUM1024/SPEKTRUM2048/SBUS/SUMD/SUMH/XBUS_MODE_B/XBUS_MODE_B_RJ01) which one is the best choice to communicate between openLRSng (cleanflight/betaflight)?
IS the submicroLRS telemetry capable?
Would be nice if someone could tell me a bit of this Stuff or give me something to read.
Thanks a lot!
Cheers,
AlexF.