Page 1 of 1
Backup stock 9x FW and Model settings?
Posted: Tue Feb 04, 2014 2:57 am
by dsa44
So, before I plunge into the Smartieparts board and ER9x/eepe, which I am learning as I go, 1) is there a way to backup my current model settings, mixes, etc for the 6 distinct models I have already on my stock firmware 9x? 2) Or even import them somehow using eepe onto the new flash? I am guessing that I should just go thru the transmitter one by one and try to write all the settings down first and then reprogram ER9x.
Thanks.
Re: Backup stock 9x FW and Model settings?
Posted: Tue Feb 04, 2014 4:02 am
by Daedalus66
No way to transfer settings. You just have to make notes. ER9X does things differently, so you have to focus on the desired outcomes. Record not just the settings but the results in terms of measured control movements.
Re: Backup stock 9x FW and Model settings?
Posted: Tue Feb 04, 2014 7:50 am
by jhsa
Pen and paper unfortunately. ;(
Sent from my GT-I9195 using Tapatalk
Re: Backup stock 9x FW and Model settings?
Posted: Tue Feb 04, 2014 9:13 am
by Kilrah
Daedalus66 wrote:Record not just the settings but the results in terms of measured control movements.
That. None of the settings can be reused, so you need to work on "replicating what you had" in the ER9X way.