Backup stock 9x FW and Model settings?

Everything about the smartie programmer and backlight kit!
Post Reply
dsa44
Posts: 31
Joined: Mon Feb 03, 2014 10:54 pm
Country: -

Backup stock 9x FW and Model settings?

Post by dsa44 » Tue Feb 04, 2014 2:57 am

So, before I plunge into the Smartieparts board and ER9x/eepe, which I am learning as I go, 1) is there a way to backup my current model settings, mixes, etc for the 6 distinct models I have already on my stock firmware 9x? 2) Or even import them somehow using eepe onto the new flash? I am guessing that I should just go thru the transmitter one by one and try to write all the settings down first and then reprogram ER9x.
Thanks.


Daedalus66
Posts: 1844
Joined: Tue Dec 27, 2011 8:22 pm
Country: -
Location: Ottawa

Re: Backup stock 9x FW and Model settings?

Post by Daedalus66 » Tue Feb 04, 2014 4:02 am

No way to transfer settings. You just have to make notes. ER9X does things differently, so you have to focus on the desired outcomes. Record not just the settings but the results in terms of measured control movements.

User avatar
jhsa
Posts: 19403
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Backup stock 9x FW and Model settings?

Post by jhsa » Tue Feb 04, 2014 7:50 am

Pen and paper unfortunately. ;(

Sent from my GT-I9195 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
Kilrah
Posts: 10795
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Backup stock 9x FW and Model settings?

Post by Kilrah » Tue Feb 04, 2014 9:13 am

Daedalus66 wrote:Record not just the settings but the results in terms of measured control movements.
That. None of the settings can be reused, so you need to work on "replicating what you had" in the ER9X way.


Post Reply

Return to “SMARTIEPARTS PROGRAMMER”