Help flashing
Help flashing
Hello everyone, I am brand new here, but have been lurking for awhile. I modded my eurgle radio as follows: blue backlight, frsky module inside, switch to switch between the outside slot or internal frsky, telemetry access, firmware upgrade plug. Bought a usbasp programmer from hobby king and startet trying to update firmware. but to no avail, all I get is this message when I try. went from win to mac.
Thanks for all your elp thanks
Thor
mac$ avrdude -c usbasp -p atmega64 -B 1 -U flash:w:gruvin9x-frsky-nospeaker.hex
avrdude: set SCK frequency to 750000 Hz
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.01s
avrdude: Device signature = 0x1e9602
avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: set SCK frequency to 750000 Hz
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: reading input file "gruvin9x-frsky-nospeaker.hex"
avrdude: error opening gruvin9x-frsky-nospeaker.hex: No such file or directory
avrdude: input file gruvin9x-frsky-nospeaker.hex auto detected as invalid format
avrdude: can't open input file gruvin9x-frsky-nospeaker.hex: No such file or directory
avrdude: read from file 'gruvin9x-frsky-nospeaker.hex' failed
avrdude: safemode: Fuses OK
avrdude done. Thank you.
Thanks for all your elp thanks
Thor
mac$ avrdude -c usbasp -p atmega64 -B 1 -U flash:w:gruvin9x-frsky-nospeaker.hex
avrdude: set SCK frequency to 750000 Hz
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.01s
avrdude: Device signature = 0x1e9602
avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: set SCK frequency to 750000 Hz
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: reading input file "gruvin9x-frsky-nospeaker.hex"
avrdude: error opening gruvin9x-frsky-nospeaker.hex: No such file or directory
avrdude: input file gruvin9x-frsky-nospeaker.hex auto detected as invalid format
avrdude: can't open input file gruvin9x-frsky-nospeaker.hex: No such file or directory
avrdude: read from file 'gruvin9x-frsky-nospeaker.hex' failed
avrdude: safemode: Fuses OK
avrdude done. Thank you.
Re: Help flashing
If you read the error messages they tell you what the problem is. avrdude cannot find your hex file. You need to run avrdude from the same directory where your hex file is. Or include the full path to the file.
-Gohst
-Gohst
Re: Help flashing
how do I save the hex file, it only wanted to be saved as a text file.
Thor
Thor
Re: Help flashing
Ok, managed to flash er9x basic to remote using eeprom program.
now I am having problems downloading the frsky hex and saving to the HD
This is the message:
Download failed: Cannot open /: Path is a directory.
dont get it, is there any other way of uploading frsky using eeprom to remote??
Thor
now I am having problems downloading the frsky hex and saving to the HD
This is the message:
Download failed: Cannot open /: Path is a directory.
dont get it, is there any other way of uploading frsky using eeprom to remote??
Thor
Re: Help flashing
ail switch no response, is this software or hardware???
Re: Help flashing
Software.
You probably have flashed the FrSky version of the firmware.
This requires, that you do the FrSky mod on the tx board. This physically reroutes the aileron and the throttle signal to two, up to that time unused pins, to free up the pins that are used to communicate with the FrSky module
Reinhard
You probably have flashed the FrSky version of the firmware.
This requires, that you do the FrSky mod on the tx board. This physically reroutes the aileron and the throttle signal to two, up to that time unused pins, to free up the pins that are used to communicate with the FrSky module
Reinhard
Re: Help flashing
I have done the frsky mod, but not figured out how to download the frsky firmware
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Help flashing
Are you on a pc? Install companion 9x. It will download and flash it for you
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Help flashing
Thanks for all your help got it flashed.
Thor
Thor
- Malcurin
- Posts: 61
- Joined: Fri Apr 20, 2012 7:58 pm
- Country: -
- Location: Matamata New Zealand
- Contact:
Re: Help flashing
Greetings to all, I also am new here long time lurker and just recently brought a 9x stock radio, i am unsure of myself when it comes to Modding this TX to be able to place er9x onto it, my soldering skills lets say shouldn't be used i am in Auckland New Zealand and moving to the Waikato in less then a week , is there someone to help me with this and get it all running with the right equipment etc cables and programmer ( i will also be buying the DIY Frsky with telemetry module from hobbyking soon ) and a host of other things back-light etc and would love to get this TX up to scratch as soon as possible
thanks
Mike
thanks
Mike
Turnigy 9x with ER9X and back light FrSky DHT 8ch DIY, FLD-02 Telemetry Display Screen
AXN with 6x4 prop .... AWESOME!!!!!!!
Canterbury Sailplanes Jazz 60 and Eraser 60
Dyna-flight Butterfly ( under construction )
AXN with 6x4 prop .... AWESOME!!!!!!!
Canterbury Sailplanes Jazz 60 and Eraser 60
Dyna-flight Butterfly ( under construction )
- GrootWitbaas
- Posts: 358
- Joined: Tue Dec 27, 2011 8:57 pm
- Country: -
- Location: Germany
Re: Help flashing
Hi Mike,
This is where you will find some one close to help. If you were in Germany or EU I would have done it for you
This is where you will find some one close to help. If you were in Germany or EU I would have done it for you
General trouble maker and wannabee Dev
- Malcurin
- Posts: 61
- Joined: Fri Apr 20, 2012 7:58 pm
- Country: -
- Location: Matamata New Zealand
- Contact:
Re: Help flashing
thanks, but since I'm new it wont let me send a PM to Westy. was hoping i would catch his eye here, Ill be moving to 20 min drive from his area to
Turnigy 9x with ER9X and back light FrSky DHT 8ch DIY, FLD-02 Telemetry Display Screen
AXN with 6x4 prop .... AWESOME!!!!!!!
Canterbury Sailplanes Jazz 60 and Eraser 60
Dyna-flight Butterfly ( under construction )
AXN with 6x4 prop .... AWESOME!!!!!!!
Canterbury Sailplanes Jazz 60 and Eraser 60
Dyna-flight Butterfly ( under construction )
Re: Help flashing
I have a friend in Auckland and he will be visiting me in Germany next month.. I'm sure when he's back in NZ he'll be converted to one of the custom FWs
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- Malcurin
- Posts: 61
- Joined: Fri Apr 20, 2012 7:58 pm
- Country: -
- Location: Matamata New Zealand
- Contact:
Re: Help flashing
Nice
Turnigy 9x with ER9X and back light FrSky DHT 8ch DIY, FLD-02 Telemetry Display Screen
AXN with 6x4 prop .... AWESOME!!!!!!!
Canterbury Sailplanes Jazz 60 and Eraser 60
Dyna-flight Butterfly ( under construction )
AXN with 6x4 prop .... AWESOME!!!!!!!
Canterbury Sailplanes Jazz 60 and Eraser 60
Dyna-flight Butterfly ( under construction )
- GrootWitbaas
- Posts: 358
- Joined: Tue Dec 27, 2011 8:57 pm
- Country: -
- Location: Germany
Re: Help flashing
yes to avoid spam and bots we need to get all new users thru the 1st few posts. by now you should be able to pm I think. If not make a few more posts ...and you should be able to pm. If not just ask and some one can pm Westy on your behalf
General trouble maker and wannabee Dev
- Malcurin
- Posts: 61
- Joined: Fri Apr 20, 2012 7:58 pm
- Country: -
- Location: Matamata New Zealand
- Contact:
Re: Help flashing
Ok i will do that
thanks
thanks
Turnigy 9x with ER9X and back light FrSky DHT 8ch DIY, FLD-02 Telemetry Display Screen
AXN with 6x4 prop .... AWESOME!!!!!!!
Canterbury Sailplanes Jazz 60 and Eraser 60
Dyna-flight Butterfly ( under construction )
AXN with 6x4 prop .... AWESOME!!!!!!!
Canterbury Sailplanes Jazz 60 and Eraser 60
Dyna-flight Butterfly ( under construction )
- Malcurin
- Posts: 61
- Joined: Fri Apr 20, 2012 7:58 pm
- Country: -
- Location: Matamata New Zealand
- Contact:
Re: Help flashing
Nope still cant Send one yet can someone please send him a Msg for me ?
thanks in advance
Mike
thanks in advance
Mike
Turnigy 9x with ER9X and back light FrSky DHT 8ch DIY, FLD-02 Telemetry Display Screen
AXN with 6x4 prop .... AWESOME!!!!!!!
Canterbury Sailplanes Jazz 60 and Eraser 60
Dyna-flight Butterfly ( under construction )
AXN with 6x4 prop .... AWESOME!!!!!!!
Canterbury Sailplanes Jazz 60 and Eraser 60
Dyna-flight Butterfly ( under construction )
Re: Help flashing
I think the limit is 5 posts, so it should be good now!
- Malcurin
- Posts: 61
- Joined: Fri Apr 20, 2012 7:58 pm
- Country: -
- Location: Matamata New Zealand
- Contact:
Re: Help flashing
it is thanks sent and talking with his now
Turnigy 9x with ER9X and back light FrSky DHT 8ch DIY, FLD-02 Telemetry Display Screen
AXN with 6x4 prop .... AWESOME!!!!!!!
Canterbury Sailplanes Jazz 60 and Eraser 60
Dyna-flight Butterfly ( under construction )
AXN with 6x4 prop .... AWESOME!!!!!!!
Canterbury Sailplanes Jazz 60 and Eraser 60
Dyna-flight Butterfly ( under construction )