USBasp V2.0 voltage setting

[MostlyHarmless]

Found my USBasp V2.0 today in the mail. Still waiting for more parts required to modify the radio (10 pin male IDC header). The programmer looks exactly like this one:



As you can see there is a jumper labeled 5V 3.3V on it. I presume that since the 9x runs on 5V, the setting should be 5V. Correct?


Regards,
Jan

[janekx]

Yes 5V is ok older USBasp have only 5V or 0V by one jumper

Odeslano pomoci Tapatalk, Samsung mobile

[MostlyHarmless]

Thank you.