Throttle lock

Post Reply
Posts: 2
Joined: Mon May 27, 2013 7:48 pm
Country: -

Throttle lock

Post by dusty2 » Thu Jan 02, 2014 7:29 am

I have a flysky th9x with ER9X installed. I'm only doing fixed wing but this plane could do serious harm since it's turning a 13" prop. How do I program throttle lock?

User avatar
9x Developer
Posts: 16141
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Throttle lock

Post by MikeB » Thu Jan 02, 2014 9:50 am

Use the sticky throttle template.

ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
Posts: 4327
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: Throttle lock

Post by ShowMaster » Thu Sep 25, 2014 3:06 pm

I have a request for a throttle lock how to. Using a esc with reverse, throttle off is at 50%. Can someone please post a sticky or other mix switch that will force throttle to %50 at default turn on.
I've been asked for this feature for a RC car, but should add it to my RC boat. I'm in no position to touch my RC gear until next week to give it a real time try holding my tx.
I will try the eepy sim on my laptop I take with me.
To be honest, I haven't used the sticky switch feature but should be.
Time to learn about it.

Post Reply

Return to “er9x model setup”