Help with V911 setup
Help with V911 setup
Hello all I flashed my radio with er9x a couple days ago and now I'm working to get my V911 heli setup and working with it. I have a mode 2 controller setup and have configured it to be mode 2. The problem I'm facing is that for some reason its using the left right movement of the left stick to control throttle.
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Help with V911 setup
Just to be clear, you have posted under ersky9x. Do you have this upgrade board, or just a stock 9x?
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 750
- Joined: Tue Dec 27, 2011 11:22 pm
- Country: United States
- Location: Carson City, Nv
Re: Help with V911 setup
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
Re: Help with V911 setup
Sorry yea wrong section its the stock 9x board.
Re: Help with V911 setup
The V911 does pair ok but again for some reason the controls seem switched around
Re: Help with V911 setup
You need to assign the right stick to the right channel on the mixer screen.
Re: Help with V911 setup
Thanks using that I was able to get every thing setup and working correctly with my v911.