Dual rates and exponential setup independently

Post Reply
Orange
Posts: 2
Joined: Tue Sep 20, 2016 9:26 am
Country: -

Dual rates and exponential setup independently

Post by Orange » Tue Sep 20, 2016 9:31 am

I'm pretty good at programming openTx, but I find it very difficult to program a switch for 3 expo settings and a different switch for 3 dual rate settings, independently of each other. It can be done with flight modes and a lot of mixing, but I think I'm missing out on something. Please add your tips and experiences.

thebriars0
Posts: 88
Joined: Wed Dec 02, 2015 9:25 pm
Country: United Kingdom

Re: Dual rates and exponential setup independently

Post by thebriars0 » Tue Sep 20, 2016 1:13 pm

Easy way would be to do one on Inputs screen and the other on the Mixes screen. .... I think.

ArchmageAU
Posts: 2
Joined: Sat Feb 08, 2014 2:01 pm
Country: -

Re: Dual rates and exponential setup independently

Post by ArchmageAU » Wed Jun 21, 2017 6:07 am

Orange wrote:
Tue Sep 20, 2016 9:31 am
I'm pretty good at programming openTx, but I find it very difficult to program a switch for 3 expo settings and a different switch for 3 dual rate settings, independently of each other. It can be done with flight modes and a lot of mixing, but I think I'm missing out on something. Please add your tips and experiences.
Global variables are your friend.

Make 3 special functions to set a GVar to the expo value you want for each Expo switch setting.
Make 3 inputs selectable by the DR switch with the appropriate weights with the expo sourced from the GVar.

(Just ensure the GVar is shared across all flight modes :) )

Orange
Posts: 2
Joined: Tue Sep 20, 2016 9:26 am
Country: -

Re: Dual rates and exponential setup independently

Post by Orange » Wed Jun 21, 2017 7:12 am

ArchmageAU wrote:
Wed Jun 21, 2017 6:07 am
Orange wrote:
Tue Sep 20, 2016 9:31 am
I'm pretty good at programming openTx, but I find it very difficult to program a switch for 3 expo settings and a different switch for 3 dual rate settings, independently of each other. It can be done with flight modes and a lot of mixing, but I think I'm missing out on something. Please add your tips and experiences.
Global variables are your friend.

Make 3 special functions to set a GVar to the expo value you want for each Expo switch setting.
Make 3 inputs selectable by the DR switch with the appropriate weights with the expo sourced from the GVar.

(Just ensure the GVar is shared across all flight modes :) )
This is an excellent solution that I was missing. Thank you for taking the time and sharing. ;)

Para9111
Posts: 2
Joined: Sun Oct 01, 2017 6:52 pm
Country: -

Re: Dual rates and exponential setup independently

Post by Para9111 » Sun Oct 01, 2017 7:01 pm

I'm trying to do the same thing can you explain how exactly this is done and how GV actually works

Post Reply

Return to “openTx model setup”