openTx - companion - differences in mixer configuration

Post Reply
morel
Posts: 8
Joined: Fri Dec 02, 2016 3:38 pm
Country: -

openTx - companion - differences in mixer configuration

Post by morel »

I have created some basic configuration of mixers - just assigned 4 switches to 4 spare channels. In Companion I've set: CH05 - 3POS, CH06 - AIL, CH07 - GEA, CH08 - THR. After uploading this configuration to TGY 9xr PRO with openTx, order of those switches changed - CH5 is ELE, 6 is AIL, 7 is GEA and 8 is 3POS. And this is configuration is really applied to radio (switching 3POS i get output on channel 8 etc). When I download configuration from radio to Companion, I get wrong order again, but the same as it was configured initially by me. What is going on? :)
Attachments
photo from tgy 9xr pro
photo from tgy 9xr pro
screenshot from Companion configuration
screenshot from Companion configuration

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: openTx - companion - differences in mixer configuration

Post by Kilrah »

Versions?
morel
Posts: 8
Joined: Fri Dec 02, 2016 3:38 pm
Country: -

Re: openTx - companion - differences in mixer configuration

Post by morel »

2.2.0 - both openTx and Companion. Yesterday downloaded, installed and tested :)
Highjack
Posts: 8
Joined: Tue Aug 26, 2014 6:44 am
Country: -

Re: openTx - companion - differences in mixer configuration

Post by Highjack »

I have the exact same problem, did you find any solution ?
morel
Posts: 8
Joined: Fri Dec 02, 2016 3:38 pm
Country: -

Re: openTx - companion - differences in mixer configuration

Post by morel »

Yes :) The solution will be delivered with 2.2.1 version of openTx https://github.com/opentx/opentx/milestone/40

Post Reply

Return to “openTx model setup”