openrcforums

does anyone have a copy of the original skyer9x splash screen

its all clear. you answered the question er9x uses eepe and skyer9x uses skyeepe ,right? know can I use opentx if I upgrade my 9xtreme board with skyeepe

================================================================================= Started AVRDUDE C:/Program Files (x86)/eePe/avrdude.exe -c usbasp -p m64 -U eeprom:r:C:/Users/ONWER/AppData/Local/Temp/eebackup.hex:i ================================================================================= av...

I cant get eepe to work Im getting a screen with the can not find usb and also no programer can someone please help I rather use the eepe then the sky eepe seem like it has more options

but its working so that must mean something and its pretty hard when you have big hands and fingers typing on a little key board sorry about all the miss communication and bad English

ok found the problem the positive was on negative side and visa-versa on the speaker but why would it make a differance it should not matter right

ok I have no power coming out of the speaker connection used a DVM810 circuit checker I double check all the connections on the 9xtreme board and all the connection pinns are all good no bent ones or broken ones

No I dont have anything to use at this output on the TX

ok did all that but no sound I cant hear no hiss or clicks or anything I open up TX and the speaker is connected to all the prongs no bent prongs or pins or connectors

Mike I did this I post it on the forum were you replyed to my question

Im trying to get the voice to work on my radio its not making any kind o f sound or beeps no sound i have check speaker connection 3 times and its connected
I hear no sound out of speaker no hiss no clicking nothing

ok ! I did all the steps you have wrote to some one in a prior explanation. I'm downloading the voice pack and then coping it to SD Card. I did all the steps and I still don't have any volume or beeps it happen after I update the smartie board, like Steve says to do on the smartie board page I also ...

Im working with smartie board 9xtreme

I tryed to do the sd voice with the download to sd and copy to a file name it firmware and in bootloader mode it says not a valid firmware try to copy to FIRMWARE bootload page but says no space so wear or how does this work

I have did all that setting and still no beep or no voice and the sd does show active I open the tx and the speaker is connected Im not able to use eepe the only one thats allowing me to flash is skyeepe so I dont know if that has anything to do with that

I have no beeps and no sound. I have check speaker and it is connected right . I have smartie board extreme installed. I'm thinking maybe the scan disk is not properly loaded with voice but then still I'm not getting any beeps.

its RF9XV2 Turnigy native 2.4 ghz

Should TX protocol switch both be on? Because it looks has if this is the only way it looks if its binding but don't have proper settings for the RX quadcopter to test if its bind. I used the templete that was on one of rc openforums page. But dont know if its right with my 250 eachine racer can you...

I'm trying to get the voice to work on the TX its not working for me i have followed all the instruction on the er9x manual no progress Help!

I have a 450 E sky belt cp and its been a well flying chopper and I want to use the er9x for trans I have a turnigy receiver I cant get the trans. and receiver to work proper the movement is always wrong no matter what I do or input ali ele thr rud In the receiver its ali ele thr gyro or rud I have ...

no page numbers Im looking for page numbers like in all the youtub

how do I use the voice recordings from the scan disk if the er9x version 218 don't have any way to pull the recordings out there is no selection on any of the screens it shows the scan disk is there and active but it does not have any selection to open for a voice recording

OK Im using the v218 I having trouble getting my turnigy 9 ch receiver to bind with the transmitter its not binding only if I go back to the original 9x it binds fast its not working when I install back the 9xtreme board and also the numbers on the screen are not showing like on the youtube shows 1/...

I was pretty sure, but since "eeprom" was the term being used... Thanks for clarifying. you try removing all the stack flashing to the board what I mean is if you continue to flash on top of another flash this happens somtimes it has happen to me I just countinue to open from the read fro...

250 racer eachine

I'm trying to figure out the control option in the opening its giving me all option except the one for ppm in the control radio settings its not there is there something Im not doing or is it the firmware what can it possibly be I cant figure it out

my er9x firmware is not showing the whole or all the choices in the control section I'm missing the ppm option how or what did I do wrong what do I need to do re flashed twice AND STILL SAME ISSUE does anyone no why please help need to get back up in the air

Oh yeah I would invest in the smartie board before buying a new trans.perferable the large kitor complete kit 9XTREME